Cross-LAN to share a single printer/scan
I need to share a single printer in 2 different LAN created under the zyxel usg20-vpn.
The printer is on LAN1 with 192.168.61.163 IP ADDRESS.
I create the object "PRINTER, host, 192.168.61.163"
I make a secury policy:
from lan2
to lan1,
source ANY
destinantion PRINTER
but it do not ping and do not work from LAN2.
why?
thanks a lot for your help
The printer is on LAN1 with 192.168.61.163 IP ADDRESS.
I create the object "PRINTER, host, 192.168.61.163"
I make a secury policy:
from lan2
to lan1,
source ANY
destinantion PRINTER
but it do not ping and do not work from LAN2.
why?
thanks a lot for your help
0
All Replies
-
Are you pinging by IP?
Do you have Use IPv4 Policy Route to Overwrite Direct Route checked in routing? uncheck it0 -
Hi @tyler779,Welcome to Zyxel Community.Did you set up gateway on printer?Without gateway setting on printer, it is unable to routing back from lan1 to lan2.1
-
I tried to set gateway on printer.nothing it do not work.
I cannot ping the printer from lan2
there is an user manual where to find some screenshoots that show how to do?
thanks.
0 -
Whoa... kudos and (healthy) envy for such a so big screen, dude :-)Another way might be a 1:1 nat among networks...0
-
Can you see ICMP request & reply on Lan 2 interface?
Packet capture:Router> packet-trace interface lan2 extension-filter icmp
0
Categories
- 6.9K All Categories
- 2 Education Center
- 1.4K Nebula
- 34 Nebula Ideas
- 41 Nebula Status and Incidents
- 4K Security
- 204 Security Ideas
- 756 Switch
- 31 Switch Ideas
- 637 WirelessLAN
- 9 WLAN Ideas
- 4.6K Consumer Product
- 107 Service & License
- 225 News and Release
- 40 Security Advisories
- 525 FAQ
- 242 Nebula FAQ
- 121 Security FAQ
- 73 Switch FAQ
- 67 WirelessLAN FAQ
- 6 Consumer Product FAQ
- Documents
- 30 Nebula Monthly Express
- 45 About Community
- 32 Security Highlight