hello everyone!!!,

Options
Thanh
Thanh Posts: 4 image  Freshman Member
First Comment Third Anniversary
in Nebula
 How to check who has access to the system on NSG100, Thank you!

Best Answers

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,531 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓
    Hi @Thanh,

    Welcome to Zyxel community!

    Since NSG-100 is Cloud Managed Security Gateway, you may go to Security Gateway > event log to check who has access to NSG-100 via console or Telnet/SSH.
    You may select Auth option to filter the log and find the logs of logged in/out device.
    The below example is the logs that I access device via console.
    If user logged in from Telnet/SSH, you will also see the IP address the user came from.

    Hope it helps.
    Zyxel Melen


  • Thanh
    Thanh Posts: 4 image  Freshman Member
    First Comment Third Anniversary
    Answer ✓
    Thank you very much for this answer! but i cant see any, please help me!!

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,531 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓
    Hi @Thanh,

    Welcome to Zyxel community!

    Since NSG-100 is Cloud Managed Security Gateway, you may go to Security Gateway > event log to check who has access to NSG-100 via console or Telnet/SSH.
    You may select Auth option to filter the log and find the logs of logged in/out device.
    The below example is the logs that I access device via console.
    If user logged in from Telnet/SSH, you will also see the IP address the user came from.

    Hope it helps.
    Zyxel Melen


  • floyelam
    floyelam Posts: 1 image  Freshman Member
    Friend Collector
    edited March 2022
    Zyxel_Melen said:
    Hi @Thanh,

    Welcome to Zyxel community!

    Since NSG-100 is Cloud Managed Security Gateway, you may go to Security Gateway > event log to check who has access to NSG-100 via console or Telnet/SSH.
    You may select Auth option to filter the log and find the logs of logged in/out device.
    The below example is the logs that I access device via console.
    If user logged in from Telnet/SSH, you will also see the IP address the user came from.

    Hope it helps.
    Thank you so so much. This answer was very very useful to me.
  • Thanh
    Thanh Posts: 4 image  Freshman Member
    First Comment Third Anniversary
    Answer ✓
    Thank you very much for this answer! but i cant see any, please help me!!
  • Zyxel_Melen
    Zyxel_Melen Posts: 4,531 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Hi @Thanh,

    If you don't see the logs after you logged in, please wait for few minutes since Nebula is still getting the logs from your device.
    Zyxel Melen


Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）