Uplink speed issue NWA210AX and GS1920-24HP
I have tried to reboot both the AP and the switch and even change the port where the AP is connected but nothing happens.
All Replies
-
Hi @nsebti
Because the speed is hardware auto-negotiation when AP’s uplink port plug-in, we usually suggest user to swap the switch port / cable with the AP that doesn’t have problem as the simple check method.
According to your description >> change the port where the AP is connected but nothing happens. 2 days ago it randomly worked fine and then the alert came back the next day.
Ensure the cable is tight connected and if the symptom goes alone with the same unit after rule out the switch port and cable issue, please proceed to RMA the AP.
Thank you
Regards,
Bella
0 -
Sorry, what do you mean by "RMA the AP"?0
-
Hi @nsebti
We’d appreciate your result confirmation of above operations, don’t hesitate to share with us and we could check if any further help is available.
For the RMA process, I left a private message to you for getting contact information.
Thank you
Regards,
Bella
0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 91 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 919 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 926 Nebula FAQ
- 422 Security FAQ
- 238 Switch FAQ
- 210 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight