GS1900-24EP Startup - Running Configuration
Options
Hey community,
sometimes I have the problem, that I cannot reach the configuration webpage of my switch. The reset button couldn't solve the problem, therefore I restored the factory defaults. This a a lot of work and always a network breakdown, even its on my home, that cant be a final solution.
I tried to find out the reason for that problem.
The first thougt was that something is wrong within the configuraton settings, there are the running configuration and the startup configuration. If I download the running configuration, I can find my changes inside. If I do the same with the startup configuration the file seems to be the factory defaults. Even if I copy the running conf. into startup conf. by this function:
A new download (Backup) of the startup conf. show no difference, seems again to be factory defaults.
According to the manual the switch is using startup conf during booting.
My switch seems to do something in between.
In my tests now, it saves changes (network config, admin passwort etc.). These values are surviving a reboot and a power shutdown. Thats strange for me, because according the startup file I assumed another behaivior.
Firmware is this version: V2.70(ABTO.1) | 01/11/2022
Can somebody explain me this behaivior. Do i something wrong?
Thanks
Alkazar
sometimes I have the problem, that I cannot reach the configuration webpage of my switch. The reset button couldn't solve the problem, therefore I restored the factory defaults. This a a lot of work and always a network breakdown, even its on my home, that cant be a final solution.
I tried to find out the reason for that problem.
The first thougt was that something is wrong within the configuraton settings, there are the running configuration and the startup configuration. If I download the running configuration, I can find my changes inside. If I do the same with the startup configuration the file seems to be the factory defaults. Even if I copy the running conf. into startup conf. by this function:
A new download (Backup) of the startup conf. show no difference, seems again to be factory defaults.
According to the manual the switch is using startup conf during booting.
My switch seems to do something in between.
In my tests now, it saves changes (network config, admin passwort etc.). These values are surviving a reboot and a power shutdown. Thats strange for me, because according the startup file I assumed another behaivior.
Firmware is this version: V2.70(ABTO.1) | 01/11/2022
Can somebody explain me this behaivior. Do i something wrong?
Thanks
Alkazar
0
All Replies
-
Hi @Alkazar,
Welcome to Zyxel Community!
Have you tried to change a different broswer and see if it's a browser cache issue?Adam0
Categories
- All Categories
- 390 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 331 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 879 Nebula FAQ
- 414 Security FAQ
- 220 Switch FAQ
- 194 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 61 Security Highlight