USG 200 PROBLEMS

rudaisssssssssssssss
rudaisssssssssssssss Posts: 2
in Security
Hi,
I have buy an USG 200 in Ebay UK with "TESTED OK" but when start, SYS blink.
With debug mode and put firmware or put database , i have Firmware Received but error 255 (my windows firewall is off). I turn in rond. Help me. When i start :

FLASH: AMD 16M

BootModule Version: V1.08 | 12/04/2007 15:36:17
DRAM: Size = 256 Mbytes

DRAM POST: Testing: 262144K
DRAM Test SUCCESS !

Kernel Version: V2.4.27 | 2015-01-08 21:37:16
ZLD Version: V3.30(AQU.7) | 2015-01-13 16:31:04

Press any key to enter debug mode within 3 seconds.
.............................................................



Start to check file system...
/dev/hda2: 18/18216 files (0.0% non-contiguous), 33806/72704 blocks
/dev/hda3: 42/43648 files (0.0% non-contiguous), 11206/174080 blocks
Done
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

Kernel panic - not syncing: Attempted to kill init!
Rebooting in 180 seconds..



AFTER PUSH THE DATABASE :

[Update Filesystem]
        Updating Database
        mv: db/etc/zyxel/ftp/conf: file not found
mv: db/etc/zyxel/ftp/script: file not found

Nothing in directories...

Why?

Thank you

Accepted Solution

All Replies

Categories

Security Highlight


Read more

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）