IPSEC VPN Site to Site and specific destination ip

xkp68 · May 2022

I have to configure an IPSEC VPN Site to site from my ATP 500 (on the left) to a custumer network (on the right)

Image: https://us.v-cdn.net/6029482/uploads/editor/ds/lk1gsmxu9apy.jpg

I have been able to setup the VPN Gateway and connection but the customer requests that the computer of my LAN must appear to his network as using a specific ip that the customer give to me:174.100.4.24

Is there a way to do this in the ATP 500 IPSEC VPN configuration?

Thanks in advance.

Filippo

Zyxel_Stanley · May 2022

Hi @xkp68

You can have a try to configure "Outbound Traffic SNAT" and "Inbound Traffic Destination NAT in VPN connection advanced setting.

Image: https://us.v-cdn.net/6029482/uploads/editor/lg/fceygjfrjbtq.png

Zyxel_Stanley · May 2022

Hi @xkp68

You can have a try to configure "Outbound Traffic SNAT" and "Inbound Traffic Destination NAT in VPN connection advanced setting.

IPSEC VPN Site to Site and specific destination ip

Accepted Solution

All Replies

Categories

Security Help Center