ZyWall 110 SSL-VPN and SecuExtender 4.0.2.0 / Can`t connect
our System:
ZyWall 110
SecuExtender 4.0.2.0
Firmware V4.32
Problem:
If we restart our ZyWall 110 the SSL-VPN connection works great but after some hours we can`t connect to the ZyWall, after restart again they works great.
Somebody know what they are having Problems?
Thanks for any help.
All Replies
-
0
-
The SSL VPN tunnel is base on HTTPS protocol. But it will effects by some of environment issue.
(a) PC interface status has changed.
(b) PC WiFi has roamed to other WiFi.
(c) If PC is behind NAT router, NAT Router WAN IP address has changed.
(d) PC is unable connect to server at that moment.
(e) PC routing stability issue.
Could you provide routing and trace route information to us? (The information must coming from same PC)
(1) Before establishing VPN tunnel.
Enter CLI command: route print
Enter CLI command: tracert [Internal IP]
(2) After VPN tunnel is established and without problem.
Enter CLI command: route print
Enter CLI command: tracert [Internal IP]
(3) When symptom happening.
Enter CLI command: route print
Enter CLI command: tracert [Internal IP]
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight