NAS326 new firmware V5.21 (AAZF.11)C0 - UPnP
Options
geert
Posts: 2 
Freshman Member
Freshman Member
Since I have installed the new firmware V5.21 (AAZF.11)C0 the NAS326 is unable to find any UPnP supported routers. (router UpnP is active). I know that it is possible via port mapping (router) but sometimes I need myzyxelcloud to update UPnP on a remote nas/router. Any idea?
0
Accepted Solution
-
Hi,
The new firmware on the release note do not mention there is behavior changing on the NAS itself
https://www.zyxel.com/support/download_landing/product/nas326_14.shtml?c=gb&l=en&pid=20150327120001&tab=Firmware&pname=NAS326#
I'm using NBG6615 as router above the NA326, it is still available to find the UPNP router.
Maybe try to reboot the router,NAS and check it again?0
Ally Member
All Replies
-
Hi,
The new firmware on the release note do not mention there is behavior changing on the NAS itself
https://www.zyxel.com/support/download_landing/product/nas326_14.shtml?c=gb&l=en&pid=20150327120001&tab=Firmware&pname=NAS326#
I'm using NBG6615 as router above the NA326, it is still available to find the UPNP router.
Maybe try to reboot the router,NAS and check it again?0 -
Thx ikubuf,after rebooting the router and disable the switch setting "Unknown Multicast Drop" UPnP is working again!
0 -
You are right. Got the same results.geert said:Thx ikubuf,after rebooting the router and disable the switch setting "Unknown Multicast Drop" UPnP is working again!
0
Categories
- All Categories
- 439 Beta Program
- 2.8K Nebula
- 200 Nebula Ideas
- 126 Nebula Status and Incidents
- 6.3K Security
- 499 USG FLEX H Series
- 323 Security Ideas
- 1.6K Switch
- 84 Switch Ideas
- 1.3K Wireless
- 49 Wireless Ideas
- 6.8K Consumer Product
- 287 Service & License
- 457 News and Release
- 89 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.3K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 96 Security Highlight
