1.

[eITS#170900154] Hardware monitor detect abnormal value.

V

2.

[eITS#180400205] Snmpwalk gets error output in TIME-RANGE-MIB.

V

3.

[eITS#180701100] while configuring TACACS+ as login method one and local as login method two, users can log in switch from both methods. It should follow the rule that only when method one is down then method two can work.

V

4.

[eITS#180800687] If the shared key of TACACS+ server is mismatched, switch will not consider the server is unreachable and will not change to other login methods.

V

5.

[eITS#190200916] Switch may be randomly rebooted if dot1x guest VLAN multi- secure mode is enabled.

V

6.

[eITS#190201160] The device will reboot unexpectedly due to LLDP memory leak.

V

7.

[eITS#190300525] Handling IPv6 routing may cause switch crash and reboot.

V

8.

[eITS#190500548] Classifier entry cannot be deleted after the binding policy rule was deleted in inactive state.

V

9.

[eITS#190500189] Switch crashes when receiving LLDP packet with incorrect length of TLV.

V

10.

[eITS#190700015] Can’t display IP source guard binding info on web GUI.

V

11.

[eITS#190800016] PD gets an incorrect allocated power value when Power-via-MDI is enabled along with PoE Max Power.

V

12.

[eITS#190800433] Can’t display the correct information when configuring “Show IPv6 neighbor.

V

13.

[eITS#190800796] Switch crashes when receiving particular IPv6 MLD packets.

V

14.

[eITS#190900353] Lost IPv6 management when IPv6 MLD snooping proxy is enabled.

V

15.

[eITS#191100449] Switch will randomly warm-reboot after a lot of continuous SSH login.

V

16.

[eITS#200200647] IPv6 DHCP snooping untrusted port is not working.

V

17.

[eITS#200500197] HTTP login switch will fail when using RADIUS authentication.

V