[NEBULA] NSG100 / LTE3301-Q222/ Bridge trouble

mark.vijgen
mark.vijgen Posts: 5  Freshman Member
First Comment
edited April 2021 in Nebula
someybody happens to know why this setup
NSG100 on wan1 port to lan port LTE3301 device.. In normal mode give's no IP to the NSG...
and if setting the lte in bridge mode (and entering the information to the webgui of the NSG of the PPOE connection works, but after a power down, nothing works anymore, because the ip of the LTE changend! How to overcome this issue??

thanks for the help

Comments

  • Nebula_Bayardo
    Nebula_Bayardo Posts: 179  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    Hi @Mark_DUTCH
    There's a known issue, when PPPoE has been configured and the NSG is power cycled, the NSG doesn't keep the configuration after rebooting. A new firmware that fix this inconvenience will be release in May.

    Please help to check the PPPoE configuration after the power down to be sure that it's related to this issue.
  • mark.vijgen
    mark.vijgen Posts: 5  Freshman Member
    First Comment
    Dear Bayardo ,

    This is exactly what happens yes... So then the problem is already known... I hope they fix this quick
  • Nebula_Bayardo
    Nebula_Bayardo Posts: 179  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    Dear Mark,
    Yes, we are working on it and will deliver it pretty soon. Thanks for your patience :smile:
  • Peppino
    Peppino Posts: 127  Ally Member
    First Anniversary 10 Comments Friend Collector
    can someone help me please where to set the PPPoE parameters on an NSG?
  • TomorrowOcean
    TomorrowOcean Posts: 59  Ally Member
    First Anniversary Friend Collector First Answer First Comment
    edited September 2018
    @Peppino

    You should be able to find the location of setting PPPoE parameters on WebGUI. ;)
  • Nebula_Bayardo
    Nebula_Bayardo Posts: 179  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    Hi Peppino,

    You can configure it in the local Web GUI of the NSG.
  • Peppino
    Peppino Posts: 127  Ally Member
    First Anniversary 10 Comments Friend Collector
    ahh ok, thanks.

Nebula Tips & Tricks