AP requierement for Zyxel ATP200

auphysch
auphysch Posts: 3
First Comment
edited May 2024 in Wireless
Hello,

I have already Zyxel ATP200 device. I want create an Access Point from this device.
On a  eshop i find 2 models i hesitate between us:
Zyxel WAX610D
Zyxel WAC6103D-I

For each of theses i saw that its with Poe+

Do i need to buy anothers equipments (cable, device,etc...) for Poe+ or its integrated in ATP200?

Thanks

Best Regards,


Accepted Solution

  • Zyxel_Bella
    Zyxel_Bella Posts: 560 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch 50 Answers
    edited November 2022 Answer ✓

    Hi @auphysch

     

    Would you like to manage the AP by ATP200 or using Nebula Cloud manage mode?

    The WAX610D and WAC6103D-I are able to work at modes mentioned above.

    We’ll recommend the WAX610D rather than WAC6103D-I since it is newer generation with maintaining firmware and more features such as remote AP, NAT and others.

    Both models require 802.3at (PoE+) power, WAX610D needs at least 19W and WAC6103D-I needs 12.48W to service in full power mode.

    You’ll need a PoE switch that can deliver enough power budget on AP’s connected port or a power adapter to provide AP power.

    Thank you

     

    Regards,

    Bella

     

     


    zyxel.com | Facebook | LinkedIn | YouTube

All Replies

  • Zyxel_Bella
    Zyxel_Bella Posts: 560 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch 50 Answers
    edited November 2022 Answer ✓

    Hi @auphysch

     

    Would you like to manage the AP by ATP200 or using Nebula Cloud manage mode?

    The WAX610D and WAC6103D-I are able to work at modes mentioned above.

    We’ll recommend the WAX610D rather than WAC6103D-I since it is newer generation with maintaining firmware and more features such as remote AP, NAT and others.

    Both models require 802.3at (PoE+) power, WAX610D needs at least 19W and WAC6103D-I needs 12.48W to service in full power mode.

    You’ll need a PoE switch that can deliver enough power budget on AP’s connected port or a power adapter to provide AP power.

    Thank you

     

    Regards,

    Bella

     

     


    zyxel.com | Facebook | LinkedIn | YouTube

  • auphysch
    auphysch Posts: 3
    First Comment
    Hello Bella,

    Thank You so Much for your answer.

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）