XS1930 Error: Add policy rule failed!

amash · December 2022

Good afternoon

When adding a rule to XS1930-10, an error Error occurs: Add policy rule failed

Please clarify what the problem may be

Zyxel_Melen · December 2022

Hi @amash,

Could you share what rule did you add and the tech support?
Please go to Management > Maintainece > tech support > all to download.
I will try replicating it and check tech support's event log.

amash · December 2022

Hi @Zyxel_Melen
Classifier Configuration

Image: https://us.v-cdn.net/6029482/uploads/editor/eo/9fsvjjs8mz4w.png

Policy

Image: https://us.v-cdn.net/6029482/uploads/editor/33/jrkz3xyhrotj.png

total Classifier - 58

total rules -9
Adding to the current rule also does not give

tech support contains the entire configuration, so I will not be able to transmit it in an open form for everyone

Zyxel_Melen · January 2023

Hi @amash,

I configure the classifier and policy you provide on my XS1930-10 V4.70 patch4 but there's no error message.
In order to check the full configuration and the event log to clarify your problem, could you send the tech support to me in a private message? So your configuration will not be opened by others.

Zyxel_Melen · January 2023

Hi @amash,

Good day.
If you have any reservations about sharing your tech support information with me, could you provide me with a list of your ACL settings so I can better understand the situation?
Thanks.

XS1930 Error: Add policy rule failed!

All Replies

Categories

Switch Help Center