XS1930-10 printer between VLANs

Options
nox79
nox79 Posts: 20  Freshman Member
10 Comments
edited January 2023 in Switch
Hi, i need a little help to configure my xs1930-10.

Need to share a printer with all my VLANs
I have this VLANs right now:

Vlan 60 - (172.16.60.x) IoT
Vlan 61 - (172.16.61.x) Guest
Vlan 1  - (192.168.1.x) Trust

The printer its installed in Vlan 60 and its up and running all working fine with ip 172.16.60.52.

I have KEA DHCP server running in Ubuntu server with ip 192.168.1.6 and server IPS to all the VLANs.

How can setup the switch and DHCP to allow printer in all my Vlans?

Thanks
Robert

All Replies

  • mMontana
    mMontana Posts: 1,300  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    IMVHO, unless printer support vLANS on its printer server... you can't.
    However maybe a 1:1 NAT might do the trick.
    Or you can create some security policy (firewall rules) that allow vLAN 1 and vLAN 61 to access to 172.16.60.52, maybe on limited services/ports.

    If you need Airprint, things are gonna be a lot trickier.


  • Zyxel_Melen
    Zyxel_Melen Posts: 1,639  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    Hi @nox79,

    Do you have a router in your network?
    If yes and all of your end devices have default gateway settings, they should be able to communicate with each other without any configuration on your switch.

    Zyxel Melen

  • nox79
    nox79 Posts: 20  Freshman Member
    10 Comments
    Options
    Hi,
    I have in my Network installed the ISP router Zyxel AX7501-B0 but have mostly all the options blocked by ISP.
  • nox79
    nox79 Posts: 20  Freshman Member
    10 Comments
    Options
    Any help???
    Regards
  • mMontana
    mMontana Posts: 1,300  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    Maybe you should talk with the ISP?
  • nox79
    nox79 Posts: 20  Freshman Member
    10 Comments
    Options
    mMontana said:
    Maybe you should talk with the ISP?
    Thanks, but i contacted many times to my ISP provider and not unlock the Router.
  • mMontana
    mMontana Posts: 1,300  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    Options
    So you need to put another one between your infrastructure and the ISP router.
  • Caroll
    Caroll Posts: 3
    First Anniversary Friend Collector First Comment
    Options
    I agree with @mMontana and @Zyxel_Melen that a router with a configured routing policy that allows for communication between VLAN60 and other VLANs would be ideal for enabling your printer to communicate effectively.

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）