DHCP-Relay on XGS1930-52HP
All Replies
-
Hi @Arvee,
DHCP Relay is a standalone mode feature currently.
Could you share your scenario of why you need this feature in Nebula?
Zyxel Melen
0 -
Hi Melen,
I'm replacing an older HP Procurve switch that was doing very simple routing duties with static routes and VLAN for a VoIP install.
The DHCP server for the data and voice subnets is on the phone controller (Mitel) on the Voice VLAN and subnet as that was the reccomendation of the phone people. Due to the DHCP options the Mitel phones need to boot.
We did try a Windows DHCP server on the data subnet instead many years ago and it was prone to failure with the Mitel phones as the phone guy warned, so DHCP duties were moved to the phone controller.
I do have the switch in standalone mode (and it is working very well), but would like Nebula as the office this switch is physically located is over 4 hours from the home office.
0 -
Categories
- All Categories
- 393 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 906 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 63 Security Highlight