RF Scan with Access point and channel occupation (wifi + non-wifi)

Wicky
Wicky Posts: 42  Freshman Member
Ideas master First Comment Friend Collector Fifth Anniversary
edited April 2021 in Nebula
I have seen this in one of the ubiquity controller software and used it.
It allows to use the AP as an RF scanner and displaying occupation of different Wif bands and channels. 
I was able to use this feature to find out that in channel 1 (2.4Ghz) there was considerable distortion of a non-wifi source.

Implement Wifi scanning of visible and non-visible networks (beacon frame) visualising the different frequencies. If possible include the results of the RF scan, non-wifi occupation if anyhow feasible. 

Comments

  • C10B
    C10B Posts: 6  Freshman Member
    First Comment Fifth Anniversary
    This would be incredibly cool and make our lives SO much easier.
  • HTU1973
    HTU1973 Posts: 4  Freshman Member
    First Comment Fifth Anniversary
    this is even implemented in consumer APS like Fritzbox, so why not in a pro AP ?
  • Alfonso
    Alfonso Posts: 257  Master Member
    5 Answers First Comment Friend Collector Second Anniversary
    edited December 2018
    Hi all

    It is a MUST.

    When the devices are not able to do it I often use some App on my Android to do it.

    I support this idea.

    Cheers
  • WebberIT
    WebberIT Posts: 53  Ally Member
    Ideas master First Comment Friend Collector Second Anniversary
    @HTU1973
    I'm interested about Fritzbox feature, do you have a screenshot or link to that? 

    @Alfonso
    The problem with scanning with phones, is that you can only see the quantity of BSSIDs, there is no information on the channel occupation or freqency noise. I think what the post creator meant is something similar to an spectrum analizer. Unless, your tool is something I've mention that works on a phone, I'll definately go for that, professional spectrum tools are pretty expensive.

  • HTU1973
    HTU1973 Posts: 4  Freshman Member
    First Comment Fifth Anniversary
    The eyes of an AP !!   There is some scanning anyway in the APs during background otherwise optimal channels could not be selected by the system. So the thing Zyxel should implement is just consulting this data in quasi-realtime and visualize this. Not really rocket science, see some screenshots. ( in German : storen = interfering channel;  funkkanal = transmit channel)
  • WebberIT
    WebberIT Posts: 53  Ally Member
    Ideas master First Comment Friend Collector Second Anniversary
    @HTU1973
    Thanks for the screenshot, do you consider the grey bar as noise levels? or is there some other way to interpret? 
    googleing the wording it says channels influenced by other radio networks, but it's not specific in defining what is "other radio network", theres already a yellow bar so I'm thinking it could be signals that are unable to be identified that is "noise" to the AP.
    Your thoughts?

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）