WAX650S with poe12-60w and still limited power

edvhoerstelde
edvhoerstelde Posts: 6
First Comment
edited May 2024 in Wireless

Is it possible to do it wrong? The WAX650S runs on limited power?!?

Unbenannt.png Unbenannt2.png

Accepted Solution

  • edvhoerstelde
    edvhoerstelde Posts: 6
    First Comment
    Answer ✓

    I had to force the full power mode for the AP.

    Power Setting

    Force overwrite the power mode to full power.

    Note:
    Only enable this when you are using a passive PoE injector which is not IEEE 802.3at/bt compliant. Abnormal reboots will happen in case of insufficient power wattage.

All Replies

  • edvhoerstelde
    edvhoerstelde Posts: 6
    First Comment
    Answer ✓

    I had to force the full power mode for the AP.

    Power Setting

    Force overwrite the power mode to full power.

    Note:
    Only enable this when you are using a passive PoE injector which is not IEEE 802.3at/bt compliant. Abnormal reboots will happen in case of insufficient power wattage.

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）