VLAN interrouting

Toulouzzzz
Toulouzzzz Posts: 6
First Comment
in Switch

Hello,

I'm on an XGS1930-28hp.

I've configured some VLAN on it.

i'd like to interconnect a VLAN with another one directly on the switch. How can i do ?

thanks

Bests

Thomas

Best Answers

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,756  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @Toulouzzzz,

    I can ping the PC in another VLAN in my LAB. Please reference the handbook chapter 2.2 for the configuration.

    https://download.zyxel.com/XGS1930-28HP/handbook/XGS1930-28HP_2020.1.pdf

    Once the configuration is set, please visit Management > Routing Table > IPv4 Routing Table to check if the routing rule has been set.

    image.png

    Then use tracert to check if the PC sends the packets to the correct gateway.

    By the way, I was unable to ping once because my laptop was connected to the Wi-Fi network, which caused it to send the packet to the network's default gateway.

    Zyxel Melen


  • Toulouzzzz
    Toulouzzzz Posts: 6
    First Comment
    Answer ✓

    Find the solution

    Mask problem

    Solved

All Replies

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,788  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula

    Hi @Toulouzzzz ,

    Could you share with us which management mode you are using, Standalone or Nebula?

  • Toulouzzzz
    Toulouzzzz Posts: 6
    First Comment

    Hi Zyxel_Judy

    A standalone mode.

    I've given an IP adresse to all of the Vlan (10.0.2.254 for the Vlan2, 10.0.3.254 for the Vlan 3...) and a 255.255.255.0 Mask

    I set the first computer (Vlan2) on 10.0.2.1 and gateway 10.0.2.254 and the other one (Vlan3) on 10.0.3.1 and gateway 10.0.3.254. but the first cant ping the other one

  • PeterUK
    PeterUK Posts: 3,577  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary

    Is their a firewall on the PC's?

  • Toulouzzzz
    Toulouzzzz Posts: 6
    First Comment

    Oh ! Good point

    I checked on one of the pc but not on both

    I check this tonight.

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,756  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    edited August 2023

    Hi @Toulouzzzz,

    Are you able to ping after disabling the firewall on both PCs?

    If the problem still exists, please let me know.

    Zyxel Melen


  • Toulouzzzz
    Toulouzzzz Posts: 6
    First Comment

    Hi

    Still not working.

    I've connectés à Switch on port 5 (Vlan3) with those settings :

    20230808_174754.jpg

    I ve connected my PC on port 1 (VLAN2) with these settings. Firewall is off.

    20230808_174807.jpg

    And here are the IP settings of my switch :

    20230808_174852.jpg

  • Zyxel_Melen
    Zyxel_Melen Posts: 2,756  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @Toulouzzzz,

    I can ping the PC in another VLAN in my LAB. Please reference the handbook chapter 2.2 for the configuration.

    https://download.zyxel.com/XGS1930-28HP/handbook/XGS1930-28HP_2020.1.pdf

    Once the configuration is set, please visit Management > Routing Table > IPv4 Routing Table to check if the routing rule has been set.

    image.png

    Then use tracert to check if the PC sends the packets to the correct gateway.

    By the way, I was unable to ping once because my laptop was connected to the Wi-Fi network, which caused it to send the packet to the network's default gateway.

    Zyxel Melen


  • Toulouzzzz
    Toulouzzzz Posts: 6
    First Comment

    Hi

    Everything is created as u explain.

    The first time I used tracert, the first ping i've sent was sent to the Wifi as u.

    I ve shut down the Wifi on my laptop.

    When I ping my switch (pluggin it directly on the same Vlan) tracert is running well.

    16915626585794080127523371747388.jpg

    I tried to ping gateway Vlan3 (10.3.0.254) from laptop connected toi Vlan2 (10.2.0.11) and it works.

  • Toulouzzzz
    Toulouzzzz Posts: 6
    First Comment
    Answer ✓

    Find the solution

    Mask problem

    Solved

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）