NWA50AX isolation des clients wifi
Bonjour,
Je souhaite savoir s'il est possible d'activer l'isolation des clients connectés sur le point d'accès Wifi Zyxel.
Firmware Version:V6.25(10) / 2022-06-17 00:39:38
NWA50AX
Serial Number:<hide due to privacy>
En effet je ne souhaite pas qu'ils ne voient ou n'aient pas accès aux ressources de mon réseau local, uniquement un accès à internet.
All Replies
-
Hello @Franz94370
To isolate wireless end devices on your NWA50AX from each other and the local network, while allowing internet access, you can utilize Layer 2 Isolation feature.
Please upgrade your device to the latest firmware version as 6.29(ABYW.2)C0 to access this feature. After that, you can follow the below FAQ for configuration steps:
Access this download library to download the firmware.
Note: Layer 2 Isolation blocks communication within the same subnet but not across different subnets. If your SSIDs are on the different subnets, the isolation requirement should be done by switch or firewall.
Zyxel Nami
0
Categories
- All Categories
- 398 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 83 Nebula Status and Incidents
- 5.2K Security
- 99 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 923 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 213 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.1K FAQ
- 1K Nebula FAQ
- 445 Security FAQ
- 238 Switch FAQ
- 213 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 142 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight