FLEX100h VPn to ATP doesnt Work

Options
SamuelJucker
SamuelJucker Posts: 3 image  Freshman Member
First Comment Third Anniversary
in USG FLEX H Series

VPn Config with Wizard, VPn Tunnel OKAY, but no traffic. What ist the Problem?

Accepted Solution

  • SamuelJucker
    SamuelJucker Posts: 3 image  Freshman Member
    First Comment Third Anniversary
    Answer ✓

    i have found the Problem. In the VPN Remote fails the Subnet. With 192.168.X.X/24 it Works. Only 192.168x.x it doesnt Work!

    Thanks for the Studerus Support

All Replies

  • PeterUK
    PeterUK Posts: 4,422 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    edited November 2023

    So this is a site to site setup if tunnel shows up and connected you like need to make a rule to allow the traffic like LAN to WAN with source/destination IP from what I remember because currently their is no zone for the tunnel on FLEX100H it uses the to zone of the VPN going out the WAN

  • SamuelJucker
    SamuelJucker Posts: 3 image  Freshman Member
    First Comment Third Anniversary

    Thanks, but there is a Zone for IPSEC in the Object Zone.

  • SamuelJucker
    SamuelJucker Posts: 3 image  Freshman Member
    First Comment Third Anniversary
    Answer ✓

    i have found the Problem. In the VPN Remote fails the Subnet. With 192.168.X.X/24 it Works. Only 192.168x.x it doesnt Work!

    Thanks for the Studerus Support

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）