GS1200-5 trunk port

Options
atux_null
atux_null Posts: 1
in Switch

Looking into this product and i was wondering how do i create a trunk port to the router and vlans assigned to each port?

in more detail i would like to have eth1 to be trunk port and carry all vlans to my router, eth2-5 assigned to vlan20,30,40,50 respectively.

Accepted Solution

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hello @atux_null

    Your setup requires configuring port 1 (eth1) as a trunk port to allow traffic from all VLANs to reach your router. To achieve this, set port 1 as a Tagged Egress Member (orange box) for each VLAN and its PVID at 1.

    For other ports (eth2 → eth5), it is important to know if the connected devices are VLAN-aware to determine the correct VLAN configuration.

    Please consult our detailed FAQ for step-by-step guidance:

    https://community.zyxel.com/en/discussion/17957/how-to-configure-vlan-for-web-managed-switch

    Remember, ensuring your router is configured to recognize these VLANs is crucial for successful communication.

    Please let us know if anything needs to be clarified

    Nami

All Replies

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hello @atux_null

    Your setup requires configuring port 1 (eth1) as a trunk port to allow traffic from all VLANs to reach your router. To achieve this, set port 1 as a Tagged Egress Member (orange box) for each VLAN and its PVID at 1.

    For other ports (eth2 → eth5), it is important to know if the connected devices are VLAN-aware to determine the correct VLAN configuration.

    Please consult our detailed FAQ for step-by-step guidance:

    https://community.zyxel.com/en/discussion/17957/how-to-configure-vlan-for-web-managed-switch

    Remember, ensuring your router is configured to recognize these VLANs is crucial for successful communication.

    Please let us know if anything needs to be clarified

    Nami

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）