How to enable SNMP AP nwa50ax

write4nik
write4nik Posts: 2  Freshman Member
First Comment Friend Collector
edited May 2024 in Nebula
image.png

I have already did it in nebula cloud, my ap were updated, but I can't use snmp

Then i try to look via cli:

Router(config)# show snmp status
active : no
port : 161
version : v2c
contact : support@zyxel.com.tw
location :
get community : public
set community : public
trap : yes
informs : yes
trap host : none
trap community: public
wireless trap : no

I've tied comand snmp-server ebable, but nothing changed

Checked manual once again, but where no other commands


How to eneble snmp?

All Replies

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    Hi @write4nik

    At this time, the NWA50AX does not support SNMP functionality, as this model is designed primarily for home and small business environments.

    However, we recognize the importance of such features for certain users and are keen to understand your requirements better, could you share more about your specific use case for SNMP on the NWA50AX?

    Nami

  • write4nik
    write4nik Posts: 2  Freshman Member
    First Comment Friend Collector

    However, we recognize the importance of such features for certain users and are keen to understand your requirements better, could you share more about your specific use case for SNMP on the NWA50AX?

    That's very unusial than your decided snmp is an enterprise feature
    That's quite old function and all other devices other vendors has it by default, even 20$ devices(nwa50 $100+)

    "your specific use case for SNMP on the NWA50AX? "

    -That's not specific. Typical monitoring process, that's not an enterprise function like guest portal or radius etc.. why did you block monitoring function to my devices?

    https://community.zyxel.com/en/discussion/comment/63094#Comment_63094

  • TomasHujcakZILLION
    TomasHujcakZILLION Posts: 2
    First Comment First Anniversary

    Hello, we have many of this devices in the field and we need SNMP for monitoring. Can You add this functionality to GUI or CLI? When I check it, that setting are here but not configurable. Thank You

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    Hi @write4nik and @TomasHujcakZILLION

    Acknowledging the interest in adding SNMP functionality to the NWA50AX, I would like to initiate a post in the WLAN Idea section for further evaluation and consideration.

    You can view and contribute to this idea in the following post:

    https://community.zyxel.com/en/discussion/21636/adding-snmp-feature-on-nwa50ax

    Nami

  • MassimilianoDelta
    MassimilianoDelta Posts: 13  Freshman Member
    First Comment Third Anniversary

    i would liket to have snmp monitoring.
    i don't understend why there is not snmp protocol
    thanks Max

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    edited May 2024

    Hi Max @MassimilianoDelta,

    Please follow this Idea post and give it a vote if you'd like to see SNMP support added to the NWA50AX:

    https://community.zyxel.com/en/discussion/21636/adding-snmp-feature-on-nwa50ax

    Best regards,
    Nami

    Nami

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）