FWA510 Cellular Bridge mode

Options
jarisevon
jarisevon Posts: 1
in Home Router

Hi,

I am trying to confifure FWA510 Cellullar connection in bridged mode.
If I disable firewall, dhcp and set Cellular IP passthrough all traffic is blocked?

So my target is to use FWA510 as simple modem in bridged mode.

Jari

Accepted Solution

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @jarisevon

    To confirm, are you looking to enable IP Passthrough mode? Enabling IP Passthrough mode allows internet traffic to go directly to a LAN computer behind the Zyxel device without passing through NAT.

    To enable this on the Nebula FWA510, navigate to the local GUI and go to Network Setting > Broadband > Cellular IP Passthrough.

    image.png

    Kay

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @jarisevon

    To confirm, are you looking to enable IP Passthrough mode? Enabling IP Passthrough mode allows internet traffic to go directly to a LAN computer behind the Zyxel device without passing through NAT.

    To enable this on the Nebula FWA510, navigate to the local GUI and go to Network Setting > Broadband > Cellular IP Passthrough.

    image.png

    Kay

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）