Firmware updated but unable to login

Options
13

All Replies

  • Peter2
    Peter2 Posts: 178 image  Master Member
    5 Answers First Comment Friend Collector Second Anniversary
    Options

    I think you cannot upgrade firmware from stock to original-CO in the regular way over web gui ?

    So you made something special and harmed the device ?

  • bulldog715
    bulldog715 Posts: 29 image  Freshman Member
    First Comment Friend Collector First Anniversary
    Options

    I almost nearly there!!!!

    Microsoft Windows [Version 10.0.22631.3810]
    (c) Microsoft Corporation. All rights reserved.

    C:\Users\pc>ftp 192.168.1.1
    Connected to 192.168.1.1.
    220---------- Welcome to Pure-FTPd [privsep] ----------
    220-You are user number 1 of 50 allowed.
    220-Local time is now 00:43. Server port: 21.
    220-IPv6 connections are also welcome on this server.
    220 You will be disconnected after 15 minutes of inactivity.
    504 Unknown command
    User (192.168.1.1:(none)): admin
    331 User admin OK. Password required
    Password:

    230 OK. Current restricted directory is /
    ftp> bin
    200 TYPE is now 8-bit binary
    ftp> put C:\Users\pc\Desktop\V517ABMT6C0.bin
    200 PORT command successful
    553 Can't open that file: Permission denied
    ftp>

    Why it can't open that file: Permission denied?

  • Peter2
    Peter2 Posts: 178 image  Master Member
    5 Answers First Comment Friend Collector Second Anniversary
    Options

    "Why it can't open that file: Permission denied?"

    try put the file direct to main directory C:\ ….

  • bulldog715
    bulldog715 Posts: 29 image  Freshman Member
    First Comment Friend Collector First Anniversary
    Options

    Still the same Permission denied

    Grrrr

  • bulldog715
    bulldog715 Posts: 29 image  Freshman Member
    First Comment Friend Collector First Anniversary
    Options

    I think it stupid Windows 11 won't let me (still Permission denied) I will try later on Linux

  • Peter2
    Peter2 Posts: 178 image  Master Member
    5 Answers First Comment Friend Collector Second Anniversary
    Options

    May be controlling your PC firewall if Port 21 is open ?

  • bulldog715
    bulldog715 Posts: 29 image  Freshman Member
    First Comment Friend Collector First Anniversary
    Options

    How to do that in pc firewall (port 21 open) is there any other way to do in Linux terminal instead?

  • Peter2
    Peter2 Posts: 178 image  Master Member
    5 Answers First Comment Friend Collector Second Anniversary
    edited July 2024
    Options

    Begin before ftp login in the windows terminal cmd line and change the directory to main directory "cd /" where the firmware file is to be found.

    You see it in the Terminal prompt which is the current .

    And then login over ftp and try again .

    If you have a ftp login try first and type in "ls" and you can see if data connection is accepted .

  • bulldog715
    bulldog715 Posts: 29 image  Freshman Member
    First Comment Friend Collector First Anniversary
    Options

    C:\Users\pc>cd /

    C:>ftp 192.168.1.1
    Connected to 192.168.1.1.
    220---------- Welcome to Pure-FTPd [privsep] ----------
    220-You are user number 1 of 50 allowed.
    220-Local time is now 00:16. Server port: 21.
    220-IPv6 connections are also welcome on this server.
    220 You will be disconnected after 15 minutes of inactivity.
    504 Unknown command
    User (192.168.1.1:(none)): admin
    331 User admin OK. Password required
    Password:

    230 OK. Current restricted directory is /
    ftp> bin
    200 TYPE is now 8-bit binary
    ftp> put C:\V517ABMT6C0.bin
    200 PORT command successful
    553 Can't open that file: Permission denied

  • Peter2
    Peter2 Posts: 178 image  Master Member
    5 Answers First Comment Friend Collector Second Anniversary
    Options

    What happens when you put in the command "ls" do you have a successfull data connection ?

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）