Switch Zyxel GS1200-5 pinging, but no web ui

firefaced
firefaced Posts: 3
First Comment
in Switch

Hi!

I'm trying to setup switch to make a 2Gb/s bond, but I cannot access Web UI at all.

Everything else is working.

I can ping 192.168.1.3.

The network with NAS is working, but its slow.

I have IP 192.168.1.10 and 192.168.1.100 for my PC and my NAS

I tried everything, turning off all LAN cables except my PC, turning WIFI on/off, changing IP to 192.168.1.4, resetting the switch. Nothing works 8(

Telnet is not connecting

What can i do? Maybe I can somehow upgrade firmware without web ui?

Accepted Solution

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @firefaced

    There might be an IP conflict in your environment. Please try isolating the PC and switch by disconnecting all other devices from the switch.

    Then, set your PC to a static IP of 192.168.1.10 and connect it directly to the switch. Try accessing the switch via the IP address 192.168.1.3.

    Nami

All Replies

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    Hi @firefaced

    Is the switch connected to a DHCP server? If so, please check the DHCP table for the switch's IP address.

    Nami

  • firefaced
    firefaced Posts: 3
    First Comment
    edited July 2024

    No switch is not connected to any server. All IPs are static. It connects PC to NAS.

    Web UI worked a while ago, now it's not

  • Zyxel_Nami
    Zyxel_Nami Posts: 659  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @firefaced

    There might be an IP conflict in your environment. Please try isolating the PC and switch by disconnecting all other devices from the switch.

    Then, set your PC to a static IP of 192.168.1.10 and connect it directly to the switch. Try accessing the switch via the IP address 192.168.1.3.

    Nami

  • firefaced
    firefaced Posts: 3
    First Comment

    Hi Nami!

    I turned off WIFI dongle and Bluetooth dongle, and it worked. Guess one of that things was conflicting with 192.168.1.3

    Thank you! 8)

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）