Where can I find in Nebula Control Center a list with all VLANs used in my site?

lrb24
lrb24 Posts: 1  Freshman Member
in Nebula

Hello, we only have switches (XGS2220-30F and GS1920-24HP. I can see how to assign a VLAN to a port but cannot see where to create these VLANs.

Best Answers

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,280  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @lrb24

    For switches in Nebula mode, VLAN configuration differs from standalone mode. There's no need to create VLANs beforehand; you can directly assign VLANs to ports. To view which VLANs are allowed on each port, go to Site-wide > Configure > Switches > Switch Ports and add the "Allowed VLAN" parameter to the table.

    image.png

    Kay

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,280  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @lrb24

    Just to provide you with some additional information: although the VLAN list doesn't appear in the Nebula interface, you can check the VLANs on your switch another way. Try using 💎 Remote SSH with Nebula Live Tools. Once you access the CLI via Remote SSH, use the command show vlan to display all the VLANs configured on the switch.

    Hope this information helps!

    Kay

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,280  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @lrb24

    For switches in Nebula mode, VLAN configuration differs from standalone mode. There's no need to create VLANs beforehand; you can directly assign VLANs to ports. To view which VLANs are allowed on each port, go to Site-wide > Configure > Switches > Switch Ports and add the "Allowed VLAN" parameter to the table.

    image.png

    Kay

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,280  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @lrb24

    Just to provide you with some additional information: although the VLAN list doesn't appear in the Nebula interface, you can check the VLANs on your switch another way. Try using 💎 Remote SSH with Nebula Live Tools. Once you access the CLI via Remote SSH, use the command show vlan to display all the VLANs configured on the switch.

    Hope this information helps!

    Kay

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）