Is my VLAN configuration correct?

2»

All Replies

  • PeterUK
    PeterUK Posts: 3,389  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited August 15

    What happens if you set a PC NIC with VLAN 10 and connect to port 5?

    is your router setup for VLAN 10?

  • Peter Tselios
    Peter Tselios Posts: 22  Freshman Member
    First Comment Friend Collector Third Anniversary
    https://community.zyxel.com/en/discussion/comment/68729#Comment_68729

    WIFIs SSIDs are assigned to VLANs. And all WIFI clients take IP access the internet etc.

    The issue is with the "PVID 1" clients, aka clients that are connected to non-vlan ports of the AP.

  • PeterUK
    PeterUK Posts: 3,389  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited August 15

    So if I understand you right you need VLAN1 for port 5 to be untag? For untag clients to get a IP?

    So your router is doing VLAN1 as a tag?

  • Peter Tselios
    Peter Tselios Posts: 22  Freshman Member
    First Comment Friend Collector Third Anniversary

    Yes.

    Router port 2 has VLANS 1,2,3 as tagged, connected to Switch port 1 which has VLANS 1,2,3 TAGGED

    AP has port 1 as VLAN 1,2,3 AS tagged, connected to Switch port 5 which has VLANS 1,2,3 TAGGED.

    WiFi ssids are under vlan 2,3 work just fine. From a any PC at the lan I can access the switch and vice versa.

    AP port 2,3,4,5 are untagged and have PVID 1. A

    ything that is connected to those portscan only talk to the AP, nothing else.

    PPlease not that I CAN access the AP (since traffic towards it is tagged)

    The only "solution" I find is to use untagged VLAN 1 on switch port 5. Only then I can access the devices that are connected to AP ports 2-5.

    I stocks on the Switch because if I connect a PCdirectly to any untagged port of the router I can access any device that is anywhere in my LAN.

  • PeterUK
    PeterUK Posts: 3,389  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited August 15

    Could you draw out your network

    Its possible an AP make VLAN 1 as untag

  • Peter Tselios
    Peter Tselios Posts: 22  Freshman Member
    First Comment Friend Collector Third Anniversary
    image.png
    image.png

    Red Lines: Unagged traffic (at least on paper)
    Blue lines: Trunks/Tagged traffic (at least on paper)

  • PeterUK
    PeterUK Posts: 3,389  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary

    so what if you use another VLAN other then 1?

  • Peter Tselios
    Peter Tselios Posts: 22  Freshman Member
    First Comment Friend Collector Third Anniversary

    For The default Vlan?

    What is the difference? No issue to test, I just want to understand the logic

  • PeterUK
    PeterUK Posts: 3,389  Guru Member
    100 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited August 16

    If you have a Zyxel AP then its set for VLAN 1 As Native VLAN meaning untag so if you uncheck that then it be tag VLAN 1

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）