NAS540 closing his SSH ports automatcly when i dont have login for 5 days

Options
mike4088
mike4088 Posts: 12 image  Freshman Member
First Comment Friend Collector First Anniversary
in Personal Cloud Storage

hello all NAS users

is there some-one who also experience this , that SSH an FTP getting disables when you dont login your NAS remotely from the Web ?

i have looking at SSHD_config is there is a command who doing this .. but i didnt found any comand who is doing this .. ?? has anyone also the same problems .

Can i add a command on SSHD.Config who will keeps my port an ftp port open ?

hope someone can help me with this to solve this strange problem

greetings

mike4088

Accepted Solution

  • mike4088
    mike4088 Posts: 12 image  Freshman Member
    First Comment Friend Collector First Anniversary
    edited April 5 Answer ✓

    yes me , i have the same issue an changed the time at : ClientAliveInterval and ClientAliveCountMax at sshd-conifg , but the problem persists , if you restart your nas540 , the defaults are restored back in to sshd_config defaaults ,, an the problems is the same again that the ports are closing by no respondings

    its better , to changed this in the files who being loaded when the NAS540 will boot an its permanent set .i am still searching where you can do that .

    any help is welcome offcourse

All Replies

  • Mijzelf
    Mijzelf Posts: 3,059 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary

    I'm not aware of that problem. Are you sure it's the NAS, and not your router?

    remotely from the Web ?

    Have you checked if you can still access the NAS locally?

  • mike4088
    mike4088 Posts: 12 image  Freshman Member
    First Comment Friend Collector First Anniversary
    edited April 5 Answer ✓

    yes me , i have the same issue an changed the time at : ClientAliveInterval and ClientAliveCountMax at sshd-conifg , but the problem persists , if you restart your nas540 , the defaults are restored back in to sshd_config defaaults ,, an the problems is the same again that the ports are closing by no respondings

    its better , to changed this in the files who being loaded when the NAS540 will boot an its permanent set .i am still searching where you can do that .

    any help is welcome offcourse

  • Mijzelf
    Mijzelf Posts: 3,059 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary

    It's hard to understand what you are writing.

    Are you able to access the NAS locally or not? And if not, is the webserver still available?

    I don't think ClientAliveInterval and ClientAliveCountMax have anything to do with this. These are about keeping an existing session alive, not about closing the server port after some time.

    its better , to changed this in the files who being loaded when the NAS540 will boot an its permanent set .i am still searching where you can do that .

    Well, you can't. The /etc directory is inside a ramdrive which is compressed stored in the kernel. That ramdrive is extracted on each boot. Only a few files are changed after boot by scripts, like the samba config. But AFAIK sshd_config isn't.

    That won't stop you from post boot editing the file (or just replacing it) and restarting the ssh server. But as it will have to be done at each boot, you'd better script it. (Unless you seldom reboot, of course)

  • mike4088
    mike4088 Posts: 12 image  Freshman Member
    First Comment Friend Collector First Anniversary
    https://community.zyxel.com/en/discussion/comment/84333#Comment_84333

    yes your right about this , i have tried it with support from AI but its stil closing the ssh an ftp ports .. i refuse an let it this way till this nas540 is ending an have to buy another NAS

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）