How to configure lan bridge on WAX620D-6E ?

gacquier
gacquier Posts: 5  Freshman Member
First Comment
edited December 17 in Nebula

Hello,

On my site, I have a NWA50AX PRO as a root AP and a WAX620D-6E that I want to use as a repeater and a wireless bridge, linkedto an ethernet switch that accesses to a common printer.

WAX620D-6E works as a repeater, but the LAN port does not seems activated (no LED light from the LAN port nor from que switch port when I plug the RJ45 cable. If I use the Uplink port the LED lights up on both the AP and the switch, but I can't access the printer.

On Nebula the Wireless Bridge is notes as "enabled".

What have I missed ?
Thanks in advance for your suggestions !

All Replies

  • Xydocq
    Xydocq Posts: 22  Freshman Member
    First Comment First Answer Friend Collector
    edited December 16

    Did you check

    Site-wide > Configure > Access points > AP & port settings

    Under Port settings LAN1 has to be enabled too.

  • gacquier
    gacquier Posts: 5  Freshman Member
    First Comment

    Thanks Xydoxq !

    Lan1 is enabled indeed, as well as lan2 and lan3. For each of them, PVID = 1 and Allowed VLANs = 1…

    Should I disable Lan 2 and 3 ?

    I managed to use an old (non zyxel) bridge for now while I try to get this WAX620D working…

    Thanks for your help :)

  • gacquier
    gacquier Posts: 5  Freshman Member
    First Comment

    ok, I 'm afraid I found the problem. It seems that you need 2 hardware supporting wireless bridge, and in this case my configuration with NWA50AX PRO as root and WAX620D-6E as bridge will never work… Can you confirm ?

  • Xydocq
    Xydocq Posts: 22  Freshman Member
    First Comment First Answer Friend Collector

    hi @gacquier

    according to this

    Distinguishing between Smart Mesh and Wireless Bridge: Features and supported models — Zyxel Community

    both AP's have to support wireless bridge. I only have NWA130BE's installed.

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,627  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula

    Hi @gacquier ,

    Please note that wireless bridging requires two compatible access points to function. The NWA50AX PRO does not have wireless bridge capability in its feature set.

    image.png

    This means you'll need to consider alternative hardware options if wireless bridging is required for your setup. Please refer to Nebula Device function table to know the compatible AP

    Zyxel Nebula - Device function table

    Judy

    Untitled Image

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

  • gacquier
    gacquier Posts: 5  Freshman Member
    First Comment

    Thanks to both of you !

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）