How to add a LAN device to a NWA50AX mesh WiFi

d_p
d_p Posts: 9  Freshman Member
First Comment First Anniversary
in Wireless

Dear Zyxel team, I have a mesh of 4 NWA50AX, one of which uses its uplink port to connect to the internet modem. All NWA50AX units provide WiFi to connecting stations.

I need to connect one station that is not WiFi enabled via LAN.

The NWA50AX units' ETH port is labeled "UPLINK". Is it possible to configure this port to be used as a standard LAN port? If not, what else would you propose as a quick solution?

Thank you!

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,201  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security

    Hi @d_p

    The "Uplink" port on the NWA50AX is specifically designed for uplink and PoE connections, so it cannot be reconfigured as a standard LAN port. However, here are a few alternative solutions to connect your non-WiFi-enabled device via LAN:

    1. Connect a switch to your internet modem (gateway):
      • Plug a network switch into one of the LAN ports of your gateway.
      • Connect your non-WiFi-enabled device to the switch. This approach allows multiple wired devices to be connected to your network.
    2. Directly connect your device to the gateway’s LAN port (if available):
      • If your gateway has spare LAN ports, this is a straightforward option.
    3. Use a Wi-Fi adapter for your device:
      • If the previous solutions are not feasible, consider using a USB or Ethernet Wi-Fi adapter for your device. This will enable it to connect wirelessly to the NWA50AX mesh network.

    Kay

    Untitled Image

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）