Missing configuration functions

Options
projmgmtde
projmgmtde Posts: 2 image  Freshman Member
in Nebula

Missing configuration functions: I wanted to dig myself more deeper into the options the GS1920-24 offers. How can I jump into these options after logging in into the configuration webserver (192.168. .. . xy)?
I don't want to use this Nebula stuff but it seems to be dependent from this Cloud?
Status says:
Hybrid Mode
Cloud

Cloud Connection Status
Connected

How can I un-connect it and do all configurations locally?

Accepted Solution

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @projmgmtde

    From your description, it seems your GS1920-24 switch is currently registered to the Nebula Control Center(Nebula CC). When a device is managed via Nebula CC, certain local configuration options become limited. If you prefer to manage your device locally, you can follow the steps in the guide below to unregister your switch from Nebula CC:

    https://community.zyxel.com/en/discussion/17872/how-to-remove-your-device-from-nebula-and-administer-it-locally

    After unregistering, Nebula CC will push a factory reset command to the switch, and it will reboot into standalone mode.

    Additionally, once in standalone mode, you can disable Nebula Control Center Discovery by navigating to SYSTEM > Cloud Management on the switch's web interface. This will prevent the switch from reconnecting to Nebula CC automatically.

    image.png

    Kay

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @projmgmtde

    From your description, it seems your GS1920-24 switch is currently registered to the Nebula Control Center(Nebula CC). When a device is managed via Nebula CC, certain local configuration options become limited. If you prefer to manage your device locally, you can follow the steps in the guide below to unregister your switch from Nebula CC:

    https://community.zyxel.com/en/discussion/17872/how-to-remove-your-device-from-nebula-and-administer-it-locally

    After unregistering, Nebula CC will push a factory reset command to the switch, and it will reboot into standalone mode.

    Additionally, once in standalone mode, you can disable Nebula Control Center Discovery by navigating to SYSTEM > Cloud Management on the switch's web interface. This will prevent the switch from reconnecting to Nebula CC automatically.

    image.png

    Kay

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）