[FWA510] every 30 seconds DALCMD: messages in logfile

EdbO
EdbO Posts: 3  Freshman Member
First Comment
edited December 2024 in Nebula

I have a FWA510 connected to 5G and see every 30 seconds a few DALCMD: messages in the log. Searching doesn't reveal any information about this messages, so what do these messages mean?

5 Dec 21 12:11:29 user notice cellwan DALCMD:
6 Dec 21 12:11:29 user notice cellwan DALCMD: Attached to parameter name shared memory
7 Dec 21 12:11:29 user notice cellwan DALCMD: Attached to object name shared memory
8 Dec 21 12:11:29 user notice cellwan DALCMD: Attached to schema shared memory
9 Dec 21 12:10:59 user notice cellwan DALCMD:
10 Dec 21 12:10:59 user notice cellwan DALCMD: Attached to parameter name shared memory
11 Dec 21 12:10:59 user notice cellwan DALCMD: Attached to object name shared memory
12 Dec 21 12:10:59 user notice cellwan DALCMD: Attached to schema shared memory

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,251  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security

    Hi @EdbO

    The syslog entries you mentioned are notice-level logs, which do not affect the service or functionality of your device.

    The specific logs are as follows:

    • user.notice DALCMD: Attached to parameter name shared memory
    • user.notice DALCMD: Attached to object name shared memory
    • user.notice DALCMD: Attached to schema shared memory

    These logs indicate that the CPE's configuration has been initialized and is ready. They are primarily intended for debugging or troubleshooting purposes and do not signify any issues with normal operation.

    If you’re experiencing any functional issues with your device or have further concerns about these logs, please feel free to let us know. We’re here to help!

    Kay

    Untitled Image

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

  • EdbO
    EdbO Posts: 3  Freshman Member
    First Comment

    Sorry for the late response, but there is something more going on. The messages above hide another problem.

    I'm running the FWA510 in bridge mode (Cellular IP passthrough) which works correctly. My router get's the ip address from my 5G provider and I can browse the internet perfectly.

    However, my provider gives me every day a new ip address which is not a problem. BUT the FWA510 sends every 10 minutes a dnsmasq-dhcp message with the same ip address. And is seems the FWA510 is interrupting the connection just slightly, but it confuses my VOIP system and breaks the connection.

    The message I'm seeing every 10 minutes:

    dnsmasq-dhcp: sendLeaseMessageToESMD send to esmd buf = {\"ac\":\"add\",\"expire\":\"857111\",\"mac\":\"xx:xx:xx:xx:xx:xx\",\"ip\":\"xxx.xxx.xxx.xxx\",\"host\":\"router\",\"vendor\":\"*\",\"moui\":\"*\",\"serial\":\"*\",\"pclass\":\"*\",\"cid\":\"xx:xx:xx:xx:xx:xx:xx\",\"ifname\":\"eth0\"}

    I don't understand why these messages are send when nothing has changed. I also got that far that I switched off DHCP completely in the FWA510, but these messages are coming.

    Am I missing something?

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）