Wireless Bridge only in 5 GHz band

felix_santiago
felix_santiago Posts: 3  Freshman Member
First Comment
in Wireless

We have two NWA55AXE AP acting as wireless bridge between two cable network segments. The wireless link appears to be congested, as 2.4GHz radio is up to 75% occupied.

Is there any way to use 5GHz band to stablish the link, or any way to disable 2,4 GHz radio only in this two APs?

All Replies

  • Bernard295Clark
    Bernard295Clark Posts: 6  Freshman Member
    First Comment
    edited January 31

    Hello!

    To use the 5GHz band for your NWA55AXE APs and disable the 2.4GHz radio, log in to the AP's web interface using its IP address. Navigate to the wireless settings section, where you can disable the 2.4GHz radio and enable the 5GHz radio. Don't forget to save the changes and reboot the AP if necessary. If you're my Oneonta managing the APs via Nebula Cloud, you can also configure these settings through the Nebula interface. This should help reduce congestion on the 2.4GHz band and utilize the 5GHz band for your wireless bridge.

  • felix_santiago
    felix_santiago Posts: 3  Freshman Member
    First Comment

    Thanks. We are managing this APs remotely via Nebula, and I'm not able to find where to disable one radio, that's what I would like to do.

    Edit radio setings.jpg

    Cloud you please help me in finding the correct way to disable a radio via Nebula?

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）