SWITCH GS-108B V5 After a few hours of work, the connected devices lose connection

Neodixi
Neodixi Posts: 1  Freshman Member
in Switch

After a few hours of work, the connected devices lose connection. They are a voip phone, a PC a printer, and another generic switch, star center.

The problem is not the other switch because all the connected devices work very well.

I turn it off and on again and it works again until about the next day!

My doubt is that the GS-108B V5 is too poor or is it defective?

Do you have ideas or suggestions?
Thank you

All Replies

  • Zyxel_Ivan
    Zyxel_Ivan Posts: 387  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    edited August 7

    Hi @Neodixi,

    I suggest you can isolate the network, and you can deploy two Pcs under the same network.

    Then conduct a continus ping test to see the result.

    Thanks.

    Ivan

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）