[NWA130BE] - Initially unable to sync date/time with personal NTP Server

Options
Maverick87
Maverick87 Posts: 62 image  Ally Member
First Comment Friend Collector
edited 9:16AM in Wireless

Hello everyone,

I've the firewall USG Flex 200HP and I've configured it as a personal NTP Server, but seems that the AP (192.168.2.3) is not contacting it.
Seems that the AP is contacting the firewall (192.168.2.1) only for DNS requests.

image.png image.png image.png

After push the button "Sync now", the AP is sync with Firewall's NTP and seems that the requests on DNS and external NTP Server is not arriving anymore on the firewall with elevated frequency (only when necessary):

image.png image.png

As for connection logs, seems that the AP try to reach another NTP Server (why?!? what is the NTP Server that try to contact??) every 10 seconds, and after the connection was successfully on the FW NTP Server, the situation was normalized.

Why the AP try to ask the date/time to other NTP Server and not retry to the Time Server Address specified?
I've collected the log from the AP, I can send you if requested.

Thank you

All Replies

  • PeterUK
    PeterUK Posts: 4,265 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary

    So is it now working correctly?

    I've not see this happen on my NWA50AX PRO when set to a local time server (my PC)

    If you reboot the AP it should run correctly, if its the first time changing the NTP server it might of wanted to check with its last known NTP server that the new NTP matches?

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）