Skip to content
  • Register

    • [NEBULA] How to switch WAC AP to Nebula from on-premises controller

    Posts: 125  Admin
    First Comment Friend Collector Eighth Anniversary
    edited April 2021 in Nebula

    This article is shown you how to switch AP to Nebula from on-premises controller. Please follow these steps to migrate your AP to the cloud and enjoy managing your network anywhere and anytime.

     Apply to WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6552D-S, WAC6553D-E


    Step1:

    Go to Nebula Control Center to register device first.

    (Check out the video here if you are not familiar with Nebula. https://youtu.be/axxkUMYdLeU)

     

    Step2: Check Firmware Updating mode. If Auto mode is configured, please skip Step4.

    image.png

    Step3: Check latest firmware version and apply the new firmware. Then the AP firmware on controller will download the latest V5.50 firmware version.


    image.png

    Step4: Upgrade AP firmware manually.

    (Firmware upgrade has been configured as auto mode please skip this step.)

    image.png

    Step5: Click Nebula icon to steer AP to NCC

    image.png

    Step6: Before moving to NCC, please configure the AP interface first.

    image.png

    Step7:

    Login NCC to manage your AP. Then you can refer following video to finish whole configuration.

    https://youtu.be/Vh8IDlIpr1g?t=134

    (Zyxel NebulaFlex Pro AP tutorials: How to switch AP to Nebula from on-premises controller)

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Comments

    • Posts: 257  Master Member
      5 Answers First Comment Friend Collector Second Anniversary

      Thanks @Zyxel_Forum_Admin

      It sounds great.

    • Posts: 8  Freshman Member
      First Comment Seventh Anniversary
      edited June 2019

      Are the firmwares available for download already? I have several WAC waiting migration to Nebula already.

    • Posts: 397  Zyxel Employee
      25 Answers First Comment Friend Collector Third Anniversary

      Hi @Good8Wifi ,

      Yes, the WAC series are available to upgrade. Please follow the steps to upgrade and enjoy Nebula. 😊

    • Posts: 167  Master Member
      First Comment Friend Collector Seventh Anniversary Nebula Gratitude

      Can you please make a guide for USG60 WiFi controller?

    • Posts: 397  Zyxel Employee
      25 Answers First Comment Friend Collector Third Anniversary

      Hi @TAPTech,

      Because there's no Nebula button on USG60 now, please follow below steps to transfer the AP from USG60 to Nebula.

      Step1:

      Go to Nebula Control Center to register device first.

      (Check out the video here if you are not familiar with Nebula. https://youtu.be/axxkUMYdLeU)

      Step2:

      Upgrade AP's firmware to v5.50 on USG60.

      Step3:

      Set the registration mode on USG60 to Manual mode.

      image.png

      Step4:

      Remove the AP from USG60 and login NCC to manage your AP.

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Quick Links

    Categories

    Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）