Route between LAN segments

Options
Gremlin99Z
Gremlin99Z Posts: 2 image  Freshman Member
in Home Router

I have a EX3510-B1 (AX5700) Ethernet Gateway. Besides the Default group, I have created a "Camera" group for my security cameras, assigned LAN2 to the segment, and setup the IP segment for this LAN segment. From Camera LAN, I can reach other hosts on the Default group but I can not reach the Camera group from the Default group. What is the best way to enable two way routing between the groups?

All Replies

  • CryBananaCat
    CryBananaCat Posts: 48 image  Freshman Member
    First Comment

    HI~

    Although direct routes are typically generated automatically for different segments on the same device, please double-check the following:

    • Client Configuration: The Default Gateway for both the cameras (Camera Group) and the PC (Default Group) must point to the EX3510-B1's IP address within their respective segments.
    • Static IP Settings: If the cameras are using static IPs, ensure the Subnet Mask is configured correctly; otherwise, return packets will not be able to find the correct path.

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）