XMG1915-18EP does not register with nebula
My switch does not seem to register with nebula. The web interface shows
Connection Status | |
Internet | Internet is ok. |
|---|---|
Nebula | Successfully connected to Nebula. |
Registration | Device is not registered yet, please register it with NCC. |
I have added the device to NCC, however there it shows up as offline.
I have already followed this guideline
https://community.zyxel.com/en/discussion/17937/zyxel-nebula-switch-troubleshooting-guide
to check for connection issues. I can ping both IPs (e.g. 8.8.8.8) as well as domains (e.g. google.com) just fine, so afaik there is no connectivity/DNS issue.
Firmware V4.80(ACGQ.3) was already installed, I ran an update regardless. No avail.
Anyone got any ideas left?
All Replies
-
Hi @mekn,
Welcome to the Zyxel Community!
Could you please help confirm which IP address your device resolves to first?
The following IP list is our NCC server domain (NETCONF service ports 4335/6667)
- 176.34.150.245
- 3.250.41.21
- 3.252.196.176
- 3.253.57.247
- 3.254.136.85
- 34.242.155.22
- 34.243.116.158
- 34.246.20.161
- 34.247.112.130
- 52.210.12.1
- 52.210.229.217
- 52.210.60.147
- 52.48.115.44
- 54.154.22.135
- 54.216.81.7
- 54.247.198.47
- 54.73.103.137
- 54.76.217.223
- 63.32.141.172
- 63.35.107.114
Zyxel Tina
0 -
Dear Tina,
the adress d.nebula.zyxel.com resolves to 3.250.41.21, which is on the list I retrieved from nebula - help center - firewall information (also attached).
However I cant find it on your list…
0
Categories
- All Categories
- 442 Beta Program
- 2.9K Nebula
- 220 Nebula Ideas
- 128 Nebula Status and Incidents
- 6.5K Security
- 607 USG FLEX H Series
- 347 Security Ideas
- 1.7K Switch
- 84 Switch Ideas
- 1.4K Wireless
- 52 Wireless Ideas
- 7K Consumer Product
- 299 Service & License
- 482 News and Release
- 92 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.8K FAQ
- 34 Documents
- 87 About Community
- 105 Security Highlight
Freshman Member
Zyxel Employee
