[NEBULA] How to switch WAC AP to Nebula from on-premises controller

Zyxel_Forum_Admin
Zyxel_Forum_Admin Posts: 125  Admin
First Comment Friend Collector Eighth Anniversary
edited April 2021 in Nebula

This article is shown you how to switch AP to Nebula from on-premises controller. Please follow these steps to migrate your AP to the cloud and enjoy managing your network anywhere and anytime.

 Apply to WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6552D-S, WAC6553D-E


Step1:

Go to Nebula Control Center to register device first.

(Check out the video here if you are not familiar with Nebula. https://youtu.be/axxkUMYdLeU)

 

Step2: Check Firmware Updating mode. If Auto mode is configured, please skip Step4.

image.png

Step3: Check latest firmware version and apply the new firmware. Then the AP firmware on controller will download the latest V5.50 firmware version.


image.png

Step4: Upgrade AP firmware manually.

(Firmware upgrade has been configured as auto mode please skip this step.)

image.png

Step5: Click Nebula icon to steer AP to NCC

image.png

Step6: Before moving to NCC, please configure the AP interface first.

image.png

Step7:

Login NCC to manage your AP. Then you can refer following video to finish whole configuration.

https://youtu.be/Vh8IDlIpr1g?t=134

(Zyxel NebulaFlex Pro AP tutorials: How to switch AP to Nebula from on-premises controller)

Comments

  • Alfonso
    Alfonso Posts: 257  Master Member
    5 Answers First Comment Friend Collector Second Anniversary

    Thanks @Zyxel_Forum_Admin

    It sounds great.

  • Good8Wifi
    Good8Wifi Posts: 8  Freshman Member
    First Comment Seventh Anniversary
    edited June 2019

    Are the firmwares available for download already? I have several WAC waiting migration to Nebula already.

  • Zyxel_Freda
    Zyxel_Freda Posts: 397  Zyxel Employee
    25 Answers First Comment Friend Collector Third Anniversary

    Hi @Good8Wifi ,

    Yes, the WAC series are available to upgrade. Please follow the steps to upgrade and enjoy Nebula. 😊

  • TAPTech
    TAPTech Posts: 167  Master Member
    First Comment Friend Collector Sixth Anniversary Nebula Gratitude

    Can you please make a guide for USG60 WiFi controller?

  • Zyxel_Freda
    Zyxel_Freda Posts: 397  Zyxel Employee
    25 Answers First Comment Friend Collector Third Anniversary

    Hi @TAPTech,

    Because there's no Nebula button on USG60 now, please follow below steps to transfer the AP from USG60 to Nebula.

    Step1:

    Go to Nebula Control Center to register device first.

    (Check out the video here if you are not familiar with Nebula. https://youtu.be/axxkUMYdLeU)

    Step2:

    Upgrade AP's firmware to v5.50 on USG60.

    Step3:

    Set the registration mode on USG60 to Manual mode.

    image.png

    Step4:

    Remove the AP from USG60 and login NCC to manage your AP.

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）