SNMP on RGS200-12P

Options
scerazy
scerazy Posts: 8 image  Freshman Member
First Comment
edited June 10 in Switch

I need to add this unit to HP IMC (HPE Intelligent Management Center), but no matter what I configure in GUI/CLI, IMC will never connect

Because SNMP is simply not accessible!

Paessler SNMP Tester - 23.3.87.552 Computername: SC-3660 Interface: 10.10.9.3
10/06/2026 10:38:56 (15 ms) : Device: 10.10.14.124
10/06/2026 10:38:56 (32 ms) : SNMP v3
10/06/2026 10:38:56 (172 ms) : Uptime
10/06/2026 10:38:57 (1207 ms) : SNMP Datatype: ASN_UNIVERSAL
10/06/2026 10:38:57 (1216 ms) : -------
10/06/2026 10:38:57 (1231 ms) : DISMAN-EVENT-MIB::sysUpTimeInstance = Generic Error (SNMP error # 5) ( 0 seconds )
10/06/2026 10:38:58 (2486 ms) : SNMP Datatype: ASN_UNIVERSAL
10/06/2026 10:38:58 (2494 ms) : HOST-RESOURCES-MIB::hrSystemUptime.0 = Generic Error (SNMP error # 5) ( 0 seconds )
10/06/2026 10:38:58 (2499 ms) : Done

Other Zyxel devices (ie GS2210-8HP) work perfectly fine

snmp-server
snmp-server version v3
snmp-server user cacti engine-id 800007e5017f000001 sha ********** priv des **********
no snmp-server user default_user engine-id 800007e5017f000001
snmp-server access default_rw_group model any level priv read default_view write default_view
no snmp-server access default_ro_group model any level noauth
no snmp-server access default_rw_group model any level noauth

Anybody has any good ideas?

Accepted Solution

  • scerazy
    scerazy Posts: 8 image  Freshman Member
    First Comment
    Answer ✓

    To get it working, one must in

    SNMPv3 Group Configuration

    add the configured SNMP user to the required Group Name with usm Security Model

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,849 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    What's your firmware version and snmp setting?

    Can the switch reach the snmp server?

    Zyxel Melen


  • scerazy
    scerazy Posts: 8 image  Freshman Member
    First Comment

    The unit does not reach anything. The unit is the SNMP destination for HP IMC

    Can they communicate between VLANS? YES, of course they can!

    It is just SNMP that does not play ball at all, whole snmp settings ARE already in the original post

    Firmware is the last available:

    V2.00(ABEP.1)

  • scerazy
    scerazy Posts: 8 image  Freshman Member
    First Comment
    Answer ✓

    To get it working, one must in

    SNMPv3 Group Configuration

    add the configured SNMP user to the required Group Name with usm Security Model

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）