[USG Flex H - V1.39(ABZH.0)ITS-260800686] - User Custom DDNS effective IP not appear

Options
Maverick87
Maverick87 Posts: 330 image  Master Member
Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Nebula Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate
in USG FLEX H Series

Hello,
I've configured multiple DDNS service: 2 NO-IP and 1 Dynu account.

For the No-IP, all works but for Dynu account, seems that the effective IP not appear also if the result is SUCCESS.

image.png

The Dynu entry is the HomeOrbit profile name, and it is custom because, if I use the Dynu Basic DDNS Type, the update fails:

Update the profile HomeOrbit has failed because Username was empty.

https://community.zyxel.com/en/discussion/33810/50h-1-39-firmware-ddns-error

So, I need to configure the Dynu entry as this:

image.png

It's possible to fix the Effective IP blank bug?

Thank you

«134

All Replies

  • PeterUK
    PeterUK Posts: 4,679 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    edited August 14
    Options

    The URL hostname I think is

    apiserver.dynu.com

    less that the old address but still works?

    but if that don't work try pubic IP with

    http://ip1.dynupdate.no-ip.com/

    the issue could be PPPoE

  • Maverick87
    Maverick87 Posts: 330 image  Master Member
    Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Nebula Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate
    Options

    Hi @PeterUK,

    I follow these istruction to update:

    https://www.dynu.com/DynamicDNS/IPUpdateClient/Custom

    It's wrong?

  • PeterUK
    PeterUK Posts: 4,679 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    edited August 14
    Options

    its likely when I last used Dynu it was apiserver.dynu.com

    I tested a DNS on Dynu with custom on FLEX H and it work but not by PPPoE

    is you URL path just

    /nic/update?hostname=example.com

    or

    /nic/update?hostname=

  • Maverick87
    Maverick87 Posts: 330 image  Master Member
    Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Nebula Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate
    edited August 14
    Options

    I use this:

    /nic/update?hostname=abc.xyz.com

    But I do not why, tell me success and effectly change the IP, but not appear on the DDNS table entry… very strange

  • kelmi
    kelmi Posts: 52 image  Ally Member
    First Comment Friend Collector Eighth Anniversary
    Options

    I think the main topic here is that Zyxel quality control for H- series is failing. Not only for this particular issue, but there are other examples. If there is is more functionality added, like in 1.39 there has been added in DDSN, the previous functionality is failing. And this is not noticed in regression tests, etc.

    K

  • PeterUK
    PeterUK Posts: 4,679 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    Options

    effective IP will not show if set to auto as the IP is determined by the remote end.

  • Maverick87
    Maverick87 Posts: 330 image  Master Member
    Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Nebula Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate
    Options

    Hi PeterUK,

    and why is available for the No-Ip service? Also the no-ip is set to auto

  • PeterUK
    PeterUK Posts: 4,679 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    edited August 15
    Options

    DDNS Type No-ip has no auto mode from your screenshot you have it set to Interface

  • Maverick87
    Maverick87 Posts: 330 image  Master Member
    Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Nebula Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate
    Options

    Hi Peter,

    Yes No-Ip is set auto from the wiz_pppoe interface, as Dyno too

    image.jpeg

    There isn't AUTO into the IP Address for No-Ip but the result is the same.

  • PeterUK
    PeterUK Posts: 4,679 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    edited August 15
    Options

    not sure what you mean your first post shows noip set to Interface with an effective IP listed

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）