-
pppoe connection not working
i recently took a vodafone connection in germany. they shared me a username and passowrd for pppoe. i tried all possible ways to connect but internet is not working. its shows red sign for internet to router. what is the issue here? my model is NBG7510
-
Zyxel VMG3925-B10C
Hi everyone, i have been hunting high and low for a firmware for the VMG3925-B10C i can find the B no problem, i have tried the FTP site which i found on this forum but it looks like its been removed, any help would be appreciated.
-
internet lights is green but not working
hi i have modem del1312-t10b after config internet lights turn to green and everything look good but when i connect to the modem with laptop or phone say you won't connect to internet i try wifi and cable but nothing work
-
NBG7510 MAC filtering not working
Hi I just found out that MAC filtering on the Zyxel NBG7510 router does not work in allow mode. I rebooted the NBG7510 and was still able to connect every device I tried. Is it possible to get a firmware update or something similar? Have I missed some important setting to make the filtering work? Additional information:…
-
[solved][VMG8825-T50] Unable to connect a machine
Hello, I've got a new modem-router (VMG8825-T50, firmware V5.50) and I've got an issue. One of my computer doesn't appear in the UI. But I can reach it in SSH, Webdav or by mounting a samba share. It slow but it works. This computer run Proxmox and two VM. None of these two VM can be reach. Do you have an idea about this…
-
EX5601-T0 and MPro Mesh App
I'm trying to use the MPro Mesh App on my Android Phone with a EX5601-T0 router Both are on the same WiFI network. The app complains that it "Cannot Connect to the WiFi router". Any suggestions on how to get the app to connect? Thanks
-
NBG7510 running V1.00 (ABZY.6)C0 not showing all my devices anymore. Why?
Hi Zyxel, My NBG7510 running V1.00(ABZY.6)C0 is not showing all my devices anymore in the WebGUI. It has been running without a reset for 43 days. The connectivity picture is only showing 2 hosts connected to the router, which is a reflection of how many NAT sessions the NBG7510 thinks it has, see below. But I have more…
-
Firmware Update PLA6457
Hello Everyone, for the PLA6457 there's firmware release (ACAJ.1)C0 with following note: 01/26/2022 Support HW2.0 Could anyone answer, what is this "HW2.0"? Does this update affect the transmission performance? Thanks in advance. Toni
-
EX3220-T0 can't be Mesh agent
When I config EX3220-T0 as a mesh agent, there' s no option on UI, MPro Mesh can enable and only work as controller. How to config it as mesh agent? Or maybe need upgrade firmware? (I can't find where to download firmware.)
-
How do I "fix" the message "invalid preshared key"?
Trying to set up the guest account - each time I select "save" i get a message stating "invalid pre-shared key". What am I missing/need to do? (Please - in VERY basic simple steps !!!)
-
PLA 5456 / PLA 6456
I've been using a pair of PLA 5456 powerline adapters for several years now as a wired connection to a pc in a remote room of the house. I recently added two PLA 6456 units to the network. Adding a single PLA 6456 unit to the line did not allow the single unit to communicate with the PLA 5456 units. The network was…
-
ARMOR G1 with ONT
Hi, is it possible to configure ARMOR G1 for connections with VLAN 100 & username password? I need to connect an ONT to the router where is the configuration? Thank you
-
Multy-U green light problem
I reset one of my multiple routers (not the main one) and although the indicator light turned green, it hasn't changed since. Additionally, I removed the device from the iOS app, but when attempting to re-add it, the light never turns solid blue. What steps can I take to troubleshoot and resolve this issue?
-
Zyxel Air iOS keeps crashing.
Hi there, I have been trying to connect to my router via Zyxel Air app but it keeps crashing when I am trying to sign in. Probably an update would be good from the developers.
-
LTE5398-M904 - Can't configure VLAN
I need to connect the router to my outdoor unit (outdoor antenna from ZTE), and i need to configure VLAN 83 (standard IEEE 802.1q) but when i try i have this error. Do you know where i am wrong? Thank you
-
bandwidth config
I have this internet router VMG5940-T20K and I can't find the settings to limit the bandwidth on my devices
-
DX3301-T0 download of listed newest firmware on official site not possible
Hello, there ist a new firmware out for the DX3301-T0 listed on https://www.zyxel.com/global/en/support/download?model=dx3301-t0 Version 5.50(ABVY.4.2)C0 from March 27/2024 , nevertheless download of the zip file is not possible only redirection to the parent site itself ! There is no button for "release notes " too .…
-
Weird certificate on brand new Zyxel FWA510
Hi, I just upgraded LTE3301-Plus router to FWA510 and noticed that WebGUI certificate was expired out of the box. (validity 2013-2023). What caught my attention was weird common name used on that certificate. I will provide picture of this. Does anyone else have any Zyxel devices with these weirds common names? This is…
-
Powerline and PPPoE
Hi Can a PPPoE connection be made over Zyxel powerline adapters? I would like to connect the FTTC VDSL modem to my router's WAN port over powerline. Many thanks.
-
VMG5313-B10B LAST FIRMWARE
Next can I find the download link for the latest firmware for VMG5313-B10B? Could someone please send it to me?
