-
NBG7510 internet connection
The question is reported by @boby, will discuss the case in this article Good morning, I think there is something wrong with this router! Last night, everything worked fine and this morning latency problem on some application. Problem that does not exist with my other network. Also when you restart the router there is no…
-
WiFi scheduling
Hi, could you please add power saving feature to NBG7510. This feature allows to set the day of the week and the time of the day when wireless radio is on and off. It lowers the energy consumption of the NBG. The feature was enabled on NBG6515. Thank you in advanced. Best Regards Petr
-
Where can I download firmware for zyxel vmg 3925-b10b, how to connect vpn for this model
Where can I download firmware for zyxel vmg 3925-b10b, how to connect vpn for this model
-
Using my modem/routeur VMG3625-T50B as a repeater
Hello, I'm connected to the internet in my entrance room with a modem/routeur Zyxel DX3301-T0. I have a switch in my office that is too far away from the entrance to be connected via ethernet plug. I have a modem/routeur Zyxel VMG3625-T50B that I want to use as a repeater, connected to the switch via ethernet, that should…
-
Changing firmware from ISP to Zyxel
Dear community, I hired the services of a ISP here in Switzerland. Then I stopped their services and they told me I can keep the router. Its a AX7501-B0. The problem is that it has a custom restricted ISP firmware. How can I change the firmware and how do I do this? Thanks anyone for pointing me into the right direction to…
-
Change Settings in a 5501 router from the command line
Hi,I would like to enable/disable telephone redirection from the command line as this is quicker and can be automated rather then going through the GUI and clicking away.Has anyone done anything like this and can give me some help?I have recorded each of an enable and disable session with firefox' developer tools but my…
-
IPv6 - router advertisement frequency [XMG3927-B50A]
Hi, Anecdotally, enabling IPv6 impairs the battery life of phones/tablets on my network. After analysing traffic on the network, I note that router advertisements are sent every 10 seconds by the XMG3927. The default for radvd is between 200 and 600 seconds. Best practice suggested by RFC 7772 for networks with…
-
Z2 Armor
Ive tried countless times to reset this router including the 30 30 30 method but it just won't reset. I know my password to login because I have the password reminders set up, but not the username. Id happily flash it, but that seems overkill. Any ideas please? I had it setup as an extender but it's been out of use for 6…
-
Can't update my router!
I have Ruoter zyxel VMG3625-T50B Current Firmware Version: V550ABTL0b2r I Downloaded Firmware : V550ABPM6C0 My router is not accepting it. The problem that forced me to search for update that when I make any change in router settings, it refreshes forever without changing anything.
-
Armor G5
Hi all Can I switch the WAN port to LAN mode on Armor G5? I need 2 ports 10G + 2.5G
-
VMG3625-T50B won't connect to internet
I am trying to configure my VMG3625. I connect the power and the DSL cable, all the lights eventually light up but the internet global symbol is red. Is this a problem with the Zyxel or my internet provider? Also I cannot connect the router directly to my laptop (MacBook Air) but I think I can configure wireless?
-
Power consumption LTE3316-M604
Can't find this under technical details, but hope for help here. Because I am looking for power leaks in my "smart house", I need to know how much each unit use idle and max. This new unit is used as bridge in front of an asus router with very few users (mostly cameras). Idle or/and max?
-
I have an F1000 Router and looking to know how to update the firmware
Hi I have an eircom F1000 ZyXEL router and i what to update the firmware and but it into bridging mode.Can you please advise the steps i should do.
-
Zyxel ax7501-b0 guest wifi problem
Hi, I have this Router Model from Yallo. It works almost all ok, but I'm struggling to use the home guest network on 2.4 GHz for some older devices (set on the "More AP/Guest" wireless option). For some integration I need to use it to add devices using my phone (Iphone 12 pro). but when using this phone model on the…
-
AMG1302-T11C - Username character set
My username contains the character "^" in it but my AMG1302-T11C does not accept my username with this. If I remove this character I am able to save my settings but not with the character in the username.
-
Expose IPv6 computer Zyxel7501-B0
I have a Zyxel6501-B0 modem/router and a static IPv6 subnet. How can I assign an IPv6 to devices in my lan and have their IPv6 exposed to the internet?
-
NBG7815 Port 80 and forwarding
I bought a NBG7815 router for the 10gb port yesterday. However I can't forward Port 80. I run my own server and cloud which needs that port. I was also displeased at having to set up an account to use a device I bought that generally does not need an account. What happens if Zyxel stop trading? Do I end up with a brick…
-
WPS connection
Hi. I have just had new Fibre Broadband installed and I'm having a problem connecting to the Zyxel router that was supplied with it.I have trien numerous time to connect through the WPS button on the rear but the printer just doesn't find it.Any help would be appreciated.Ian McAuley
-
EX3301-T0 Problem with adding websites to block.
Hi!I've a EX3301-T0 and i've been trying block some websites. But all i get is a timer on what day and time i can block that DEVICE. I want to block certain websites but don't seem to find the setting for it. I'm using V5.50(ABVY.3.1)C0 firmware
-
AX7501-B0 - Cannot connect to Disney Plus using Wifi - But can via another AP's WiFi
Hello, Recently got this AX7501-B0 router as we upgraded our Home internet to Hyperfibre2, 2000Mbps Up and Down. We have had Disney Plus for over a year, and it works fine to our TV and Mobiles (All Android), however after we got this new Router we cannot connect to Disney plus on ANY of the mobile phones anymore, when…
