-
Zyxel EMG6726-B10A admin login fails
connected to 192.168.1.1 I see the admin /password login screen but I receive an error ‘incorrect password. I am using defaults written on router admin and 86H5Q5V68X Or admin 1234. Have manually reset router many times.
-
Bug in zycli trustdomain setting
ZySH> zycli mgmtsrvctl config -t add ip/32Set trust domain IP:ip/32��ZySH> zycli mgmtsrvctl config -t add ip Set trust domain IP:ip/0 Weird output and i in fact can not connect from the server with the ip.
-
EX3301-T0 Unable to Change Device Name on Connectivity Page
When I try to change the name of 4 devices on the Connectivity page of my router I get the spinning dots for a few seconds followed by the message…. WARNING Setting not successful. Please try again. No matter what name I chose, or how often I try, I get the same message. The devices in question are my MAC Studio, a Sky Q…
-
ZYXEL EX5601-T0 - how to assign the same NAT forwarding ports to 2 lan IPs?
Hello everyone! I have a ZYXEL EX5601-T0 https://service-provider.zyxel.com/global/en/products/ethernet-cpe/ethernet-iads/ex5601ex5600-t-series I can't solve this issue: PC 1: assigned static ip 192.168.1.100 PC 2: assigned static ip 192.168.1.200 In NAT section I opened , for PC 1, ports 50100 and 50101 for TCP/UDP…
-
Router Configuration - Gaming
Hi, I've recently installed a fibre connection at my place, using a Zyxel router model EMG3525-T50C. I have had the isp configure the router, and I am reaching the desired speeds, however I cannot seem to log in to a certain game. Other games connect fine. If I have to connect the console using Hotspot or another…
-
DX3301-T0 WiFi keeps dropping (but router says its fine)
So, my wifi from my zyxel DX3301-T0 router keeps dropping. I run netspot and the wifi disappears. I connect to the router with ethernet and it says that its working fine. The green lights are on for 2.4ghz and 5ghz and there are no reported issues, yet the wifi has disappeared. The only thing that fixes it is rebooting the…
-
Whats the default username and password for that versionvmg3625-t50b
I updated my router vmg3625-t50b from ur website then i reset router to factory settings and now i cant log into router page because i dont know the default username and password for this router
-
How to access APN, proxy-server and GPRS settings on ZyXEL Keenetic 4G III
I've got router ZyXEL Keenetic 4G III which I use with LTE 4G USB Modem with SIM card Used to work OK, yet recently the Internet connection is being lost too often. The Provider (the one who issued the SIM) suggested to make sure that APN is set to the address they provided, proxy-server is turned off connection type is…
-
I have a EX5601-T1 router and I am experiencing "micro-disconnects" when connected via wifi
Hi, I have a EX5601-T1 router and I am experiencing "micro-disconnects" when connected via wifi. The "micro-disconnects" is noticeable when playing an online game (game freezes every 20 seconds or so for less than a second which causes a "stutter" effect in the game) or when watching a streaming video like Netflix (quality…
-
WIFI showing red light
I’m renting a property that came with WiFi so have no access to the account used to set it up. The WiFi LED on the router is red and I’m struggling to find anything helpful online. Idk what to do i just want to speak to a person not a chatbot
-
DX3301-TO - Netmask changed, how to Web Access
Dear Community, I use DX3301-TO in combination with Austrian Provider A1. Default IP is 10.0.0.138, I want to change the netmask and for this purpose, there is already an option to choose between 10.0.0.0, 192.168.0.0 and a third one which I do not remember. As soon as the netmask was changed to 192.168.0.0, I cannot…
-
Router EX5601-T0 Media Server
Hello, I connected an USB device on the USB port of the router: the file sharing works well but the Media Server doesn't work, it's not listed on the network. I have a Media Server on the PC and it's visible and accessible from all devices connected to the router (LAN and WiFi). Are there any setting that I have to do?…
-
Access Control List not working on AX7501-B1
Hello Community I own a AX7501-B1 and have configured two VLANs: VLAN ID 1 - Default - 192.168.178.0/24 VLAN ID 10 - Guests - 192.168.5.0/24 This works fine so far. My Goal is to drop traffic between those VLANs. That's why I've created two ACLs: Both are configured like this: Problem: Traffic is still going from one to…
-
Zyxel Multi M1 loose WIFI connectione while roaming
Hi, I have installed a Zyxel Multi M1 with 5 satelitesatellites at my home. My Iphone looses wifi connection when I move in my home from room to another room. There is good wifi connectivity in both rooms. Best regards /Majeed Hakimi
-
DX3301-T0
Could you provide me with information on the hardware of this router, such as the CPU, RAM, and flash?.
-
LTE4506 frequent disconnections
Hello, I recently got an LTE 4506 router with a 4G sim card. Everything works perfectly, except that I have to restart the router several times a day because I can no longer access the Internet. It says the connection is established, I can do a Google search, but can't access websites. On the router interface page, the…
-
VMG3625-T20A Cant Turn Off WiFi Password
Hi there, I have a Zyxel VMG3625-T20A (V5.30(ABIE.6)). For some reason I'm not able to turn off WiFi security to run open WiFi (I intend to use MAC address filtering for whitelisting).
-
VMG3625-T50B Latest Firmware
My router version is V5.50(ABPM.7.3)G0. I want to update it to the latest version available, but I can't find the correct one. The version I found is 5.50(ABPM.9.3)C0, but its last part is "C0" instead of "G0". When I tried to upload it to my router, I encountered an error. Can anyone please help me with this issue?
-
How can i learn chipset of my modem/router
I got zyxel vdsl modem from my isp türk telekom. there is literally no information about product. neither in zyxel website nor isp. isp has chipset knowledge of all other modems but idk why not this one modem is zyxel dx3300-t1 FwVer:5.12.27.0_B_A60901 HwVer:T14.F7_0.0 this is the all information i have
-
Assigning static IP to clients with Static DHCP (EX3600-T0)
Hello! I'm trying to assign static IP address (static DHCP) to a client in my house, but I can't find a setting in my router to do so. When I read the manual (https://download.zyxel.com/EX3301-T0/user_guide/EX3301-T0_V5.15_5.70_Ed2.pdf), it should be under Network Settings → Home Networking → Static DHCP. But I don't have…