-
NR 7101 Kernel 2 deleted
Hello dear community! I deleted kernel 2 on my NR 7101 and now the device no longer works! The LED light only flashes red. And the PC only has a short connection and cannot identify the network during this time. Do you perhaps know how I can get the firmware running again or is the device now scrap? Best regards…
-
NR7101
Good afternoon, I have WindTre (Italy) as a provider. The closest tower supports 5G SNA SSD. When I make a connection with my Pixel4 (5G) phone I get download speeds of 200 mbps. When I use the NR7101 I barely get 35 mbps. The upload speed is higher, 70 to 100. I've updated the firmware to 100ABUV7C0 and the LTE module…
-
NR7101 super slow/no connection
Since day one I'm having issues with the connection, super slow and sometimes there would be no internet for couple of minutes, and sometimes it would be fast and fine, sometimes i would have 20mps download and ZERO upload, which makes surfing the web impossible due to zero sent packets. I'm no experienced person but I…
-
Port forwarding USG200 issue
Hi all, I am trying to redirect port 7980 to a lan IP of 192.168.1.30 Everything works well on the LAN and the device is responsive on port 80. However, when I try to access the device from the WAN it looks like the port forwarding is not working correctly. Any advice here?
-
Product variations query?
Nebula NR7101 Nebula FWA710 The product specifications are very similar..... Am I missing something, or are they pretty much the same? Which one is better and why? Thanks in advance
-
5G home/office network scenario... it will work?
Hello everyone, I would like to build a home/office network with these devices: * 5G router NR7102 * Managed switch XGS1210-12 * Switch MG-108 * Access Point NWA50AX Pro The 5G router is connected directly to the 2.5 Gbit port on the switch XGS1210-12. The switch, on the other hand, is connected via an adapter SFP/RJ45 to…
-
LTE7490-M904 cant disable ip passthrough mode
Hello,my firmware is V1.00(ABQY.6)C0 , ip passthrough it's giving my internal network some problems expecially at the solaredge inverterS (a pair in primary-secondary configuration active-active) that cannot contact their network monitor ips . So my idea was to disable my IP passthrough and have a nat on my lan.. problem…
-
NR 5101 | Both 2.4Ghz and 5Ghz on the same SSID?
Does the 5Ghz wifi network (SSID) also offer the 2.4Ghz bands so that older devices can still connect to wifi? I'm trying to set up my Wifi network to have a single SSID where devices that support 5Ghz connection will use those bands and older devices that only support 2.4Ghz will use those bands. With other routers I've…
-
NR7101 - Interrogating SMS Messages on SIM
I've got a SIM receiving SMS messages in a NR7101. I've conencted via telnet - and accessed via admin login. I can see available commands including sys sim - which shows me the sim is a-okay. However I cannot see how to issue AT commands to interrogate the SIM - anyone got any ideas ???
-
ZyXEL 5101 NR
Normally, my zyxel 5101 has three LEDs on: green - blue - green, and they are on constantly. From time to time the blue LED starts to flash incessantly, which I can only stop by logging into the web interface and making any change in the configuration.What is the reason for the blinking of the BLUE LED?
-
N2101, Firmware upgrade failure
When I try to start the firmware upgrade, I receive an error while downloading from the network. Where can I find the file to start an upgrade via file upload from my computer? Attached is my actual firmware.
-
Zyxcel NR5101
I have a Zyxcel NR5101 being used in a commercial application as a failover 5%G service with an unlimited EE data SIM. This signal is excellent and the router easily services three wireless APs and a number of LAN devices. Also connected to a switch connected to the Zyxcel router are two VoIP desktop phones. We are…
-
NR2101 problems
Hello, I have some problems with my 5G router NR2101 (admin login and lan port). As a solution, I would like to install the firmware: V1.00(ABUS.4)C0 again to see if the problem is solved. Or if you have a newer firmware to download please. Thank you
-
NR7102 : SMS ?
I just got a NR7102 for 5G failover with my Ubiquiti Dream Machine SE, I had a quick look to the NR7102 webinterface, I don't see anywhere to acces the SIM card's SMS, is that an expected beheivour?
-
NR5103E WPA key issue
Hi Firmware V1.00(ACBJ.0)b12 I'm trying to setup my NR5103E WiFi network. I have an existing WPA key that I wish to use and it already entered in multiple devices. Some of these don't support special characters however the web UI interface blocks entries that don't conform to a Zyxel-defined spec (despite the default…
-
Urgent Request for Assistance: Need Firmware and TFTP Server to Unlock Zyxel NR5103 Routers Purchase
Dear Zyxel Community Members, I hope you're all doing well. I'm reaching out to this knowledgeable community seeking urgent assistance to address a critical issue with the Zyxel NR5103 routers I recently purchased from EE Telecommunications. My purchase involved 50 routers, and I was under the impression that they all…
-
How do I enable ICMP ping from wan on NR5103E?
I have set up ICMP as a protocol under firewall and under acess control set this Ping Any/32 Any/32 ICMP Accept However pings are rejected. How can I alow ping from wan?
-
Cant Enable IP Passthrough mode
I get an error: "Please check if there is corresponding interface grouping before switching to IP Passthrough mode" How do I fix? LTE7490-M904
-
NR7101 low speed - unable to fix
Hello, TLDR: Despite latest firmware and proper debugging and I'm not getting speed higher than 90MB/s on my NR7101 when my iPhone is getting speed higher than 500MB/s at the exact same spot. On the NR7101: has V1.00(ABUV.8)C0 and RG502QEAAAR13A02M4G (various versions didn't change behavior) Tried to do a factory-reset…
-
LTE7490-M904 - IP passthrough
Hi, LTE7490-M904 manual says it can do IP passthrough (6.10 Cellular IP Passthrough)? But no settings like the manual says that enable it? How do you enable it? Thanks
