-
NR7101 - Downgrade R13A04 to R13A02
Hello Everyone Here on the forum several files have been shared that allow incremental downgrades such as: "RG502QEAAAR13A02M4G-RG502QEAAAR11A07M4G" and "RG502QEAAAR11A06M4G-RG502QEAAAR11A03M4G" it's possible to have also the downgrade: "RG502QEAACR13A04M4G_ZYXEL-RG502QEAACR13A02M4G_ZYXEL" ? It would be very important to…
-
Why can i not lock cells? Nebula 5G NR Indoor Router Nebula FWA510
Why not? Modem is supportive of such a feature? Bring an update to enable this? I recently bought this router and im already dissapointed that one of the few routers with 4x4 (in my country) ext antenna support dont let me lock cells… Such a simple thing to allow? Even if not in router page atleast give documentation on…
-
FWA510 Firwmare Initial Update Not Working
FWA510 is using routed mode and is obtaining an IPv6 address. Nebula Center site wide/configure/firmware management shows an update is available. After selecting update now, and going to the devices tab, it says "Follow upgrade time" possibly indicating it has sent the firmware update command. However, after waiting a very…
-
NR7103
Hii I have a problem with login to the device . I can ping the device but i didnt connect to GUI . Factory reset not working , I try it several times . The router is bought in O2 SK but i want change the Provider to Telekom SK . Exist some loader to reflash the firmware ? Thank you for every help .
-
How to make use of the AP of FWA510 when in IP Passthrough Mode
Now this is a guide on how to do it but I still think due to how IP Passthrough Mode work can work without another router. So you will need to make use of the FWA510 AP when in IP Passthrough Mode and it can really be any router. You use on the FWA510 port LAN1 for the IP Passthrough Mode with a fixed MAC to your other…
-
Inquiry about FWA515
hi I have a router FWA515 I have a few questions: How do I know the processor temperature? I want to combine the 5G N77+N78 frequency. What are the SSH commands? What are your tips for increasing performance? Thank you for All
-
FWA505 DYNDNS in manual but not on router
Hello I bought the FWA505 so i could use the dyndns feature , but the option are not available on the device. in the FWA505 manual on device there arent DynDns option is there a hidden menu somewhere ?
-
when logging on admin web UI, Zyxel certificate is invalid...
Does Zyxel plan to renew public certificate used by browsers ? current certificate is invalid.
-
FWA501 looses connection and becomes brick
Hi just got the FWA501 and that have the same problem with dropout that only can be resolved with a hard reboot same as this thread https://community.zyxel.com/en/discussion/24326/fwa710-connection-drop-out-power-cycle#latest It is located far in the woods and only solution is to drive several hours to make a hard reboot,…
-
FWA510 firmware fault - incorrect upload speed reporting
The speed reported reported by the upload speed detector is always far too low - quite often the same figure of 2.69M. This is supposed to be the speed between the router and the internet and it is wrong. This speed is reported in both the admin web interface and the Zyxel Air app It is obvious it is too low as the upload…
-
Recover credentials for NR7123 outdoor unit
Hi, The default password on the PoE plug of the outdoor unit I have doesn't work for and unfortunately it is located too high up on my two storey house to safely physically hit the reset to factory settings button on the unit itself. It is possible the installer reset it from default because I didn't change it myself. Can…
-
How to connect fwa701 to a fwa505
hi, I can’t seem to get an internet connection from my fwa701 on my fwa505. The fwa701 is in bridge mode (dynamic) and when it is connected to my pc I can access the internet. Thanks for helping
-
Lost Password for my NR7302
Hello, I own a Zyxel NR7303, but unfortunately, I’ve lost the PoE adapter that had the sticker with my Wi-Fi and admin passwords on it (as recommended in the manual, I had attached the sticker to the adapter). Because of this, I can no longer access the device’s configuration page. I’ve read that Zyxel can assist in…
-
Missing Password Sticker on Zyxel NR7302 - Any Solutions?
Hi everyone, I recently bought a Zyxel NR7302 5G NR router on eBay, but unfortunately, the sticker with the default password is missing. Without it, I’m unable to access the router’s interface. Does anyone know if it’s possible to replace or recover the password in this situation? Maybe a way to reset the router or contact…
-
FWA710 LAN settings
I want a LAN address pace different from the default 192.168.1.1 - I want 10.0.0.1 / 24 for compatibility with my existing LAN. There are two conflicting places in the 'Web-based Configurator" to do it: a) on the home screen LAN section and b) on the Network Setting - Home Networking section. If I 1) Factory Reset, 2) use…
-
LTE7490-M904 default admin password after upgrade
Hello, I managed to upgrade an LTE7490-M904 from firmware version 1.00(ABZK.0)C0 to 1.00(ABQY.6)C0. All worked fine (web UI, connections, everything) until I had to hard reset the configuration. Now the router is visible on the net (bot LAN and WiFi), but any admin password I try is not valid. Tried with the one printed on…
-
Password after changing firmware
I have a Three network NR5103 Router and I want to upgrade the firmware to the Nebula-FWA505 Firmware (same router) which has been done before and improves the performance. My question is regarding the Password after flashing the firmware. Will the new firmware still use the current password or default password on the…
-
Zyxel FWA505 - Syslog to remote server PRTG
Hello, I have tested the Zyxel FWA505 with PRTG Syslog Receiver and it works well. Syslog messages from the FWA505 (UDP/514) are correctly received by PRTG, and log events from the router appear as expected in the monitoring dashboard. Configuration on the router is simple from the “Log & Report > Log Settings > Remote…
-
NR7101 V1.00(ABUV.11)CO
https://www.zyxel.com/global/en/support/download?model=nr7101
-
FWA505 Max clients 32 instead 64 ???
Hi configured both WLAN (SSIDS WANDA and fura), both with 2.4 & 5 GHz, but the maximum clients that router accepts is 32. Firmware is up to date. My network has around 40-50 devices
