-
Main node keeps resetting
I have a setup with two Multy X units. Suddenly the main unit startet to reset (red LED) for no apparat reason. It startet for about a week ago and have since happened five times. Today alone it has happened two times. Firmware version V2.20(ABKJ.0)C0 What is going on? #MultyX_Sep_2019
-
Multy X within the same Subnet, can it?
Hello good day. I have recently been given the Multy X, all perfect and very easy, very good speed, now that I need to see if it can be done ... how to configure the Multy X to work within my same subnet, let's say I have 192.168.1.X but when configuring the Multy X this by DHCP takes one that the Router provides, until…
-
Connect Multy Mini to Multy Plus?
Hi We have two Multy Plus in our store. We also have two simple repeaters we use to connect two different payment terminals and printers to the network that only have ethernet and no Wi-Fi. So Multy Plus -> Linksys/T-Link repeater -> Payment terminal/printer. However, it would be nice to have it all on one network so that…
-
Ethernet backhaul - Multy X
Hi. I have a question about ethernet backhaul. Because of the layout of our house I can't use ethernet backhaul by the main node. I have to use by one of the wireless connected nodes. Will this work? Full line = WiredDotted line = Wireless #MultyX_Oct_2019
-
Multy X devices stop working almost daily
Hi, I have purchased a pair of Multy X devices almost a year ago. So far until maybe a week ago they have worked properly. I use them in AP mode and main Multy X is connected to a 4G router. Firmware version on the devices is V2.20(ABKJ.1)C0. I'm not sure if it's related but the firmware update did come at a similar date…
-
Co-existence of Multy X with Powerline
For some time I have made use of Powerline devices on my home network. These include powerline devices providing wired Ethernet and those providing Wireless connectivity. I am now considering using Zyxel Multy X units as my main networking strategy. My question is this. If I still wish to connect some clients via Powerline…
-
How to switch 5 Ghz broadcasting off at MULTY X
We are happy with MULTY X system (3 stations), but we need to use only 2,4 GHz frequency. I didn't find any possibility how to deactivate 5 GHz broadcasting, can you help me with it? Thanks. #MultyX_Oct_2019
-
Multy U System AP mode?
Hello, I can't manage to find a option for the AP mode in the App. Can you please help me? Also the Android app always crashes when you try to open the Settings tab. #MultyU_Oct_2019
-
Country code conflict Apple IMac
I got a problem with my IMac due to the country code . AAfter the latest software update from Apple I GOT a severe problem with the default code CZ which would not work ant more. Conflict with my NO code. How do I change the country code om the Multy X to NO from the default? #MultyX_Oct_2019
-
IPV6 on Multy X
Hi, Is IPv6 turned on as standard on a Multy X? If not is there a way of switching it on? I am trying to add a NEST protect to my home and NEST customer services have advised that I am struggling to do so because IPv6 may not be tunred on or compataible with the Multy devices Many thanks
-
Multy X - Firmware Release Notes to v2.20(ABKJ.1)
Hi, Can you upload the release notes for the new firwamre released today for the Multy X? It seems strange that the relase notes aren't uploaded to the FTP site at the same time the new firmware is released. Thanks.
-
My multy APP can’t link to my device
My multy APP can’t link to my device,what can I do #MultyX_Oct_2019
-
My DoorBird advice can't connect to the Multy X network
i cant connect several DoorBird indoor stations or cameras to my Zyxel Multy. Set up WLAN for DoorBird finds the WLAN but can't get in. We do not have any parental controls, blocking ... #MultyX_Oct_2019
-
WSQ50 DDNS support
Hi, when will be possible to configure a DynDNS (dyn.com, no-ip.com)? Best regards, Fernando Vieira #MultyX_Sep_2019
-
無法連線
更換至中華電信的設備後原本可以連線的 MultyX 變成一直亮紅燈 用藍芽完全抓不到，事後嘗試重開怡然如此 之後壓後面的 reset 重新設定完畢後依然如此 紅燈恆亮並且藍芽抓不到 AP 電腦 ping 8.8.8.8 是可以 ping 成功的 topology : 中華電信 > 家裡的 switch > MultyX #MultyX_Sep_2019
-
How a new installation of the Multy App can connect to an existing MultyX
I had a new Handy with installed Multy App. But this cannot connect to a working MultyX. Is it possible to keep the existing working configuration and simply connect with the "new" App to the System.I need help for that. Thanks! #MultyX_Sep_2019
-
Ai Shield trail over
Hi, my free trial period is now over, i only want to use parental control in the multy app, how do i do that? #MultyX_Sep_2019
-
Deactivate Aishield
Hi I have a trial version of ai shield. How do i deactivate it? #MultyX_Sep_2019
-
Multy X is very very inconsistent
I have Hyperoptic 1Gb fibre optic router next to bedroom with Multy X 1 get 300 to 350 mpbs there 3 m from router have anoth multy X in living room manage on good day 175 mpbs but need to reboot restart factory reset every weekend. I am happy to send back to Zyxel as their customer service is far too technical and not user…
-
Multy X with Somfy Indoor Cameras & Bridge Mode
I have been using the Multy X for some time without any issues. My BT Home Hub 6 is connected to the Multy X via Ethernet and the BT Hub 6 does not generate WiFi. I recently bought Somfy Indoor Security Cameras, but when they connected tot he Multy X WiFi and I could see them in the Multy App as connected with an excellent…
