-
Multy Plus, disable WLAN by timer
By Access Control it‘s only possible to disabel a device access. How can I disable the Admin WLAN, guest WLAN etc. by Timer / Profile? #MultyPlus_Jan_2019
-
Allow operation & configuration of Multy X even during outages of internet connection
So it seems like today, my internet provider is having a particularly bad day. This morning, my home networking wasn't working at all. A few basic things are working now, my two Multy X still aren't (solid red light). I'm still in the middle of troubleshooting. Some sites are simply unreachable. Seems like Zyxel might be…
-
Multy-App and Alexa Skill show 0Mbps download/upload speed & no option to test my smartphone speed
Hello community! Today I wanted to test the internet speed of my two Multy X using the Multy app (diagnosis). Unfortunately both devices show 0 Mbps for both download and upload although I have full bandwidth access to the internet. But both devices communicate with each other with more than 500 Mbps. This is the only one…
-
Is DHCP server turned off in bridge mode?
My network has two Multy X devices, first one in bridge mode, and a cable router from the provider with WiFi turned off and DHCP server active with a limited address range to be used and a few IP addresses reserved via MAC. Every now and then, I'm seeing IP addresses on my network that are outside of that range. Is there a…
-
Multy Ubuntu
Hi. I dont have a phone and purchased a zyxel multy. I cannot connect my Ubuntu Computer to the Zyxel router, why? #MultyX_Jan_2019
-
Multy X - Secondary Node disconnecting/rebooting
Hi, Recently bought Multy X and the secondary node keeps disconnecting/rebooting every day - I have tried moving it etc and it still happening, the logs don't show much and it's frustrating me :( #MultyX_Jan_2019
-
3300 Router phone controller app
Good day iam looking in the play store for a controller app for my 3300 in order to limit usage for my kids an visitors the one i downloaded from playstore will not work can you asssit #Biz_Security_Jan_2019
-
Unable to connect to internet
Muliple attempts to connect via the App have failed. Several resets done. I am extremely gutted by this as I was expecting better things. #MultyX_Jan_2019
-
Is there a way to encourage my Android phone to connect to the Multi X with the fasted WIFi signal
I have just installed 2 Multi X devices. One upstairs and one down. I have given them both the same network name for 2.4 and 5ghz. My problem is that once my phone (Samsung S8+ latest Android version) has latched on to one it won't let go and latch on th the faster one as I move round the house. Is there a solution other…
-
parent control not working on multy x.
When I try to set times (change profile) when internet is allowed it will not let me do this. In the App the message pops up "new profile erstellen" and this is it. It hangs and I need to restart the APP. It used to work but after a reset it is not working anymore. Please help. Thanks. #MultyX_Jan_2019
-
Several Issues/Questsion with a Zyxel Network
I'm using a Zyxel 1312 (B30A) as a VDSL modem -> Routing mode. It is connected to a Multy X. There are deviced connected by Cable and some by WLAN. Q1: How do I access the Modem configuration without swapping cables/wifi? Q2: Is there a way to configure the Multy without the app (maybe a web interface?) on a Desktop…
-
Muty X Firewall?
I was told when using a static IP on my Fritzbox, the Firwall on the Fritzbox will be disabled. Does the Multy X has a Firewall built in? If so how can I make adjustments? I cannot find anything in the Mutly X App. Thanks again for your help. #MultyX_Jan_2019
-
Multy X wifi cannot found by other devices
Hello. My Multy X should be running ok and the blue led is on. Problem is that none of my devices (mobile phone, iPad etc) cannot find the Multy X wifi network. It used to work perfectly until today. Now I cannot connect to my home wifi at all with none of my devices. According to Multy app everything is ok with the…
-
Multy Plus (WSQ60) / Daisy Chain
Dear Forum.. Anybody knows how many Multy Plus (WSQ60) you can link to each other. Is it still like the multy X 4 or something? I cannot find this anywhere.. #MultyPlus_Jan_2019
-
Will Multi handle 6 nodes???
Just installed Multi X into my Devon (Cob & Stone) house with good results, much better than the power line adaptors I was using before. Problem is that some of my internal walls are more than 3ft thick and made of stone and cob so wifi does not travel too far. I still have a couple of black holes, in the kitchen and…
-
Difference of units in package?
Hi! If I were to buy for example a 3-pack of Multy X, are all the units in the package the same? That is, can I use either one as a main router and the other as nodes or is one of them specifically meant to function as the main router? I ask, because I might like to use each of them as separate routers for their own…
-
Multy not txing 5GHz after house move - why???
Just re-installed Multy after house move and after a few minutes I can’t detect transmission on 5GHz Wi-Fi - any thoughts on why this should be and how to resolve? #MultyX_Dec_2018
-
Multy App not compatible!!!!
just bought a pair of multy x. But I cannot install the app on my Huawei P20. It say my device is not compatible. When i use "https://play.google.com/store/apps/details?id=com.zyxel.multyx&rdid=com.zyxel.multyx" both my phone and tablet is gray. Please advice. #MultyX_Dec_2018
-
Multy Xs daisy-chained with cat5?
I have a long, large house split into 3 sections with 2 foot stone walls separating the sections. Currently, I have 3 old routers connected by cat5 cabling which serve as WiFi providers in each section. Can I replace these old routers with Multy xs and daisy-chain them with the cat5 cabling via their LAN ports?…
-
Parental Control hangs Multy X
Hi, Multy X When I enter the parental control or click the "connected devices" in the bottom of the main screen which brings me to the device list the app hangs. I can see "Parental control" on top and a spinning circle. (No list of connected devices. The app hangs here and not possible to go back. All other functions in…