-
Connect existing Multy setup and new app install
Have re-installed the app on new phone and cannot connect back to my existing Multy setup that is working ok. App show "get ready", with cables and plugs. Do I have to reset Multy and build network from the beginning? :( #MultyX_May
-
Synology & Multy X
No formatter is installed for the format not-found
-
Synology & Multy X
No formatter is installed for the format not-found
-
Does the Multi X support different DHCP scopes and static routes
As above, I need a system that supports custom DHCP scopes and static routes. Does Multy X do this? If not, then I'll be sending it back as the Velop does. #MultyX_May
-
Synology & Multy X
Hallo zusammen, ich nutze seit kurzem den Multy x, bin sehr zufrieden. Bisher war der Multy Router im Bridge Modus hinter einer Fritzbox, die MUSS leider auch bleiben da der Anbieter das vorgibt und sie der Router ist. Auf der FritzBox sind ein paar Portfreigaben eingerichtet. Nun wollte ich das auf dem konfigurieren Tool…
-
Port in der Multy X App freigeben
Hi, mein NAS möchte die Ports 80 und 443 frei haben, wenn ich das in der App versuche freizugeben sagt er das es ein Systemreservierter Port ist den man nicht freigeben kann, was tun? #MultyX_May
-
Is Multy X able to connect IP phones or DECT?
Is Multy X able to connect to IP phones or DECT Phones? or do I need an additional "box"? #MultyX_January
-
New firmware V2.00(ABKJ.2)C0 available
New firmware V2.00(ABKJ.2)C0 available, can't see any release notes #MultyX_April
-
Multy X gone from mycloud.zyxel.com
Hi, I am unable to administer my Multy X. It seems that all there is no paired devices in mycloud. The App on my phone is not able to connect to my setup even thought I have been using the app previously for this task. Why is my setup gone on the cloud and how do I get it back? Best Regards Joakim #MultyX_April
-
Roadmap for new Features and Enhancements on Multy X.
Hi Are there a Roadmap for upcoming new features and enhancements for Multy X. Anders #MultyX_April
-
Multy X and Netatmo Precense Camera
Hello,I wanted to ask if instability is known when you include a Netatmo Precense camera in the Multy X network in the form of 2-3 crashes per day. Because I have such a problem since I use this camera. Interestingly enough, however, when I plug the camera into the guest network, the crashes are almost zero. #MultyX_April
-
Zyxel Multi X ac3000 - Number of Supported Internet Devices
Hi, My current wireless system has about 33 device with a mixture of Sonos, Apple gear, TVs, cameras etc. Some only support 2.4GHz, but most are using the 5GHz frequency. However, my router can't handle the demand and has started to act unpredictably, like losing wireless connectivity etc. So, naturally I want to move to a…
-
Multy x problems with new app
got 4 pcs. Of multy x. Did use the whole day trying to start up the system with the new app 2.0.0 for iOS. It does install the first one But hangs at the second one with the message ’settings error’ I Have tried Everything, swapping units, iPad, iPhone 6, iPhone X, resets, on off with WiFi-only using LTE, different…
-
second multy x settings fails every time
Just bought multy x with two routers and the first went fine and works perfect , but when i try to add the second one, it starts and loading and the when it shall find the multy device it comes up with failed settings (no more informartion) the only choice is to rest the router and try again which comes up with the same…
-
Multy X - channel overlapping & Poor App
Hello New to this forum and to having the Multy X I see poor performance of the app, both via the app for Android and for iOS (iPhone) app version 2.0.0.180326 like sometime the speed test under diagnose works and sometime not. Under Information I see the 2nd Multy X is leaving and joining it self multiple time. Both are…
-
How does the multy auto configure routing??
So i just setup my multy and everything worked perfect. What im confused about is how thw routing between my isp modem router and the multy is working. I didnt setup any routes for 192.168.212.x yet everythinf works??? #MultyX_April
-
Daisy Chain on Multy
Hi everyone. After the newest update, daisy chain is finally an option to which to choose. But after running the speed diagnostics I'm confused... (2018/04/04 23:46:41) I'm sharing a screenshot from my latest speedtest while on daisy chain and I find it strange that my number one node "Vaskerom" acts like it still on star…
-
Not able to get wifi back on after power off and then on again.
Do I have to run som new setup to get wifi on again after a power off and on? #MultyX_April
-
Are there plans for Port forwarding on the Multy X?
I've been looking at getting the Multy x solution for my wireless at home but The only current issue I have is that I need to be able to use port forwarding to my wired server. This is done in my Current Cable router but I was hoping to just use that in Model mode and let the Zyxel deal with everything. Thanks…
-
New firmware - Any changes to how many nodes supported?
Hi, Thanks for a great update on the FW and App. Is there any change for how many Multy X nodes that are supported? I would like to use 4. #MultyX_March
