-
[NEBULA] multiple APs using same channel in close proximity
Why are multiple APs on the same controller using the same WiFi channels (2.4GHz and/or 5GHz) when they are physically in close proximity to each other? Isn't DCS suppose to avoid this? I can understand that this can happen on 2.4GHz but it really shouldn't happen on the 5GHz band since there are a lot more channels than I…
-
[NEBULA] Information on Android Nebula Mobile APP "test" notifications
Dear Nebula users, For those who uses Android Nebula APP, you may have noticed receiving one or two push notifications having the content as "test" or "nancy test". This is a testing notification originally meant for testing on our beta testing APP, however due to some changes on the Google platform we've accidently sent…
-
[NEBULA] How do we remove a device that no longer exists from the Clients list?
How do we remove that old device where we've once edited the description before? It still exists in the Client list even though the device has been gone from the network for days now.
-
[NEBULA] Hidden SSID´s when using mesh
Hi, is there a way to hide the hidden networks that are created when activating mesh ? Users are confused about the sudden appearence of an open and secure hidden network in windows Regards Thomas
-
[NEBULA] Nebula Switch Issue Announcement
Dear Nebula Users, We have identified an event of Nebula Switch being disconnected from NCC.First of all, there’s no network operation impact at this time.It only affects management and monitor services of the Nebula Switch devices by the network administrators. If you encounter the following symptoms, please power cycle…
-
[NEBULA] WiFi Device Descriptions - where is the source?
Can someone shed some light on where the WiFi device descriptions are "read" from, what is the source? In particular on a Mac? And on a Windows PC? We'd like to adjust the source so that the list of devices helps us determine which computer it is. Any suggestions on where to look is appreciated.
-
[NEBULA] seeing current AP active power levels?
Is there a way to see the active transmit power levels of an AP? I cannot find it on the Monitor screen. I can see it in the Configure / Radio Settings but that isn't the current active power level is it?
-
[NEBULA] Force AP to transmit a minimum power level
Is there a way to force an Access Point to transmit a MINIMUM power level? There is a lot of 2.4GHz in the area and we basically want the AP to over power them for the local office area. Is this possible? If so, how?
-
[NEBULA] Managed PoE switches for Nebula CC
Will the GS1200-5HP work with the Nebula CC?
-
[NEBULA] NSW 802.1x with Cloud authentication
Dear Support, We have design switch solution with 802.1x and Guest VLAN to provide permission to access wire network. I'm using NSW100 to enable 802.1x and Guest VLAN then add user account on Nebula Cloud Authentication. But, after try to login with cloud user on Windows 10 can't access to network just only get Guest VLAN…
-
Adding WPAD(Web-Proxy ) data.
I want to add the WPAD(Web-proxy) when a client will be distributed network settings via DHCP.
-
Display indicator showing DFS signals have overruled fixed channel selection on 5Ghz band
On the monitor page of AP add an indicator to show that channels selection have been overruled due to DFS signals. Gives immediate feedback to to administrator what is going on.
-
Is AP WIFI radio signal ON/OFF?
I would like to see whether wifi radio signal is on or off (i.e. due to SSID scheduling). I can´t see it on web page. My AP is NAP-102
-
[NEBULA] Can old information on the NCC Capture Portal be removed
I have been trying to setup my Guest Wi-Fi so it loads the NCC capture portal front page with an agree button before users can start using the Wi-Fi connection through to the Internet. It has virtually worked but an old welcome page/message that I setup, keeps being offered to new connections rather than the current newer…
-
[NEBULA] Features available in 2018
It mentions in the comparison chart for NCC features between Free, Professional & Professional Lifetime that a Configuration Backup/Restore feature will be available in 2018. Does anybody know if this has been released yet or is still to come? I cannot see this as an option in the NCC portal at the moment, but I might be…
-
[NEBULA] Moved: Is WMM coming to Nebula?
This discussion has been moved.
-
[NEBULA] NWA1123-ACv2 failing to upgrade to latest firmware
Hi, 1 out of 3 of my NWA1123-ACv2 APs will not upgrade to the latest firmware - V5.45 (ABEL.1)C0, it repeatedly fails (orange and green flashing led) and has to be rebooted for it to start working again. I've tried forcing it to update via the console and also let it try updating via the site scheduled day/time and all…
-
SSL VPN
Hi ZyXEL I have a wish, like in the former zywall and USG series we could use SSL VPN with the secuextender, will it be available in NSG50, 100, 200 later?
-
Prioritize voip traffic
Hi all, I would like to know if it is possible to give VoIP traffic priority on other network traffic in the Nebula NSG 50? Hope you can advice. Thanks upfront. Best regards
-
[NEBULA] What causes the dashboard to give "data processing" for a long time
When I try to access an organisation after logging in, I get this message and it takes forever for the screen to provide access to information on the Nebula Dashboard. The dashboard says "data processing" forever and I do not get past this message.
