-
AP DHCP NAT mode bandwidth limit?
On a network we've taken over, there is an SSID is set to DHCP NAT mode across a floor with 6 APs. As it isn't tied to a VLAN where a central Traffic Shaping policy can be applied on the Security Gateway in Nebula, If we apply a Rate Limit on the SSID, e.g. 10Mb, will this be 10Mb across all 6 access points, or 10Mb per…
-
No Showing Clients on NCC anymore
My devices are connected for sure cause they just working fine, but I can't show them anymore in the current clients list. On all my AP show "current clients = 0" and in the details "Current clients:No client." Support request enabled : Invite Zyxel support as administrator thanks
-
New Zyxel Customer & (2) New NWA50AX Access Point Issues
Hello. I was super excited to get my NWA50X yesterday. Setup was easy (if accepting the defaults) which I really liked. My home setup: (1) NWA50AX downstairs (1) NWA50AX upstairs Issues: 1) NWA50AX downstairs on the Access Points list page it says channel is running on channels 157*/161/149/153 [5GHz] BUT, I manually…
-
Low-power mode - disabling radio on schedule
As with the scheduling of the SSID availability I would like to see a kind of low-power mode where particular AP's are actively scheduled for a low-power mode where radio is disabled and the device enters a low-power state instead of using POE scheduling on a switch to permanently shutdown the AP and no triggering alarms.…
-
Nebula VPN MFA - Certificate Error
I'm configuring the IPSEC client to use Nebula Cloud Auth with MFA (ATP500 connected to Nebula). It all works well, but the webpage to enter my MFA token has an invalid certificate. The standard security settings we use on all of our clients is to block sites with certs that can't be validated. What's the best way to solve…
-
Set DHCP Lease To One Day
Let say person logs in 1 jan at 08:00 hrs and logs out at 1 Jan 17:00 hours. DHCP Lease set to 2 days. So will the lease expire at 3 Jan 08:00hrs or 17:00 hrs? Will setting a lease duration of 1 day be too short because the router have to keep "re-learning" mac addresses? Will it affect the hardware?
-
Setting up L2TP VPN on Nebula
Appliance: USG Flex 100 NCC: Don't see any version number, but live on 10 Jun 2022. I have read this: https://community.zyxel.com/en/discussion/4143/setting-up-vpn-connections-on-nebula-and-end-devices-to-enable-a-secure-connectivity-for-remote-work Can you please update to address new configurations - Step 1 has new…
-
License and Inventory not working for me
I have purchased 14 licences, when I try to assign them, firstly the UI is very confusing and secondly I assign a licence but the device does not show the licence as assigned, and the licence now says inactive. What am I doing wrong?
-
Checking DHCP Pool Clients In Firewall & How To Clear It
I am using NCC to control my NSG Firewall. Q1 How do I check the clients (mac and ip) that are assigned to this dhcp pool? (sh ip dhcp binding in cisco) Q2 How do I clear inactive users? (clear ip dhcp in cisco) Q3 How do I check how much lease time they have left? Q4 Is there any way to alert the admin if the DHCP pool is…
-
FAILED: "Send Installation File To Installer" from Nebula
I setup the initial parameters (WAN, DNS, etc) of my USG FLEX 100 via the Nebula portal. I then selected the "Send Installation File to installer" option for the firewall config. After about 10 minutes, the screen on the Nebula portal was still spinning. I can NOT see an option to download this file from the portal. If…
-
External router cannot connect
I have configured an external router to our network, but I cannot connect 'incorrect password' despite setting it up correctly. DNS may not be working correctly but I cannot verify this currently. Model: WAC6552D-S Any help appreciated. Thanks. Matt
-
NWA1123-AC bereits registriert
Hallo, ich habe einen NWA1123-AC. Dieser ist schon registriert, auf meinen Vorgänger. Wir haben jetzt einen neuen Account gemacht, da wir den alten nicht kennen. Die FRage ist, wie kann ich die registriert raus löschen lassen?
-
GS1920-24HP pair functional but have status "offline" in NCC
I've just updated the firmware for my two GS1920-24HP V4.70(ABMI.4) and this is the result: NCC sees them both as "offline" and inaccessible for any operations or configuration changes, but they are clearly on and functional in that the port connections and PoE all work and the network is working fine. Two points: * I've…
-
a questions about client display at nebula app and web
1 In the client template in the nebula app, you can see that there are many disabled clients, but they do not exist in the web version，why? 2 How can I not display these disabled clients on the app, or delete them? Block them? In short, don't show it, it's too ugly
-
Application Patrol stops working after upgrading Flex500 to firmware 5.30
Hello. We have Flex500 controlled via NCC. Yesterday I've upgraded the firewall to firmware 5.30, and the security policy with some application patrol had a working malfunction: it stops ALL the traffic of our LAN, not only the application traffic it was designed to stop. I have had to disable the security policy. In…
-
Route subnet to specific WAN
I want to route internet all traffic from VLAN10 - subnet 172.16.0.0/24 via WAN2 on the NSG100. If I try to create a policy route with the following I get an invalid destination IP notice: I know I am missing something, but not sure what.
-
SSIDs are not seen by older Laptops
I have 3 AP (NWA50AX) controlled by the Nebula-Cloud. Evrything seems to be fine but there are 2 older Windows-Laptops they do not read the SSIDs from the Zyxel-AP-network. None of the 5 SSIDs is seen on the older laptops. On other devices the SSIDs work as expectedt. The older laptos see other SSIDs from APs outside the…
-
No Subscription - NWA210AX
Can I use Access Point NWA210AX without any subscription?
-
Zyxel NWA210AX Channel-Power-Range Relation
Hi, I have NWA210AX AP at home. If I select lower channels like 36, 48 etc. on 5Ghz, I see the Transmit power is 18dBm on Radio Settings (Nebula) If I select higher bands like 153 or 161, I see power is increased to 24dBm. So one of my questions is: Which situation is better in terms of coverage or are they same? (If we…
-
NWA210AX Uplink Wireless
Hello, I have a USG Flex 100. An NWA210AX is connected to it via LAN. Another is connected wirelessly. If I restart the AP, I have an uplink of 1900 for a long time. Then only 220. I have already changed the position. greeting Marcus
